Overview
The Rubicon Express R/ERE3727 is a rear lower adjustable control arm for the 2020 to 2026 Jeep Gladiator JT. It is intended for short arm suspension setups and also works as a replacement for worn or damaged factory control arms.
Rubicon Express built the arm from thick wall DOM tubing and fitted it with its Super-Flex joint, which the company says gives the axle unrestricted movement off road. Adjustment lets the arm be set for pinion, caster and wheelbase.
Key features
- Super-Flex joint allowing unrestricted axle movement off road
- Thick wall DOM tubing
- Adjustable length for pinion, caster and wheelbase setup
- Powder coated for corrosion resistance
- Replacement option for damaged factory control arms
Short arm suspension basics
A short arm suspension replaces the factory upper or lower arms with shorter links, which changes how the axle moves and how the pinion angle sits. Rear lower arms carry a large share of the axle load, so the joints and tube need to hold up to repeated articulation on rough terrain.
Replacement arms are usually fitted in pairs, and both sides should be set to the same length. Check the joint for smooth movement through full travel, and confirm the bolts are snug after the first few runs. Surface rust on the powder coat can be cleaned and touched up to protect the tube.
- Replace arms in pairs when possible
- Check joint movement through full travel
- Touch up powder coat chips to limit rust
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/ERE3727 |
| Position | Rear lower |
| Type | Tube |
| Joint | Rubicon Super-Flex |
| Tubing | Thick wall DOM |
| Finish | Powder coat |
Vehicle fitment
It fits the 2020 to 2026 Jeep Gladiator JT, including the Rubicon, Overland, Mojave, Sport and Willys models.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for a Wrangler JL or JK.
Installation notes
Set the adjustment for the pinion, caster and wheelbase you want, then check the alignment before driving. The arm is powder coated for corrosion resistance and covered by the Rubicon Express Advantage Warranty.
What’s included
One rear lower adjustable control arm under part number R/ERE3727.












