Overview
The Rubicon Express RE3756 is a pair of fully adjustable rear lower control arms for the Jeep JK Wrangler. They are sold as a pair and mount in the rear lower position. Rubicon Express describes them as a replacement for damaged factory arms and as an adjustable upgrade to a short arm suspension.
The arms are made from thick wall DOM tubing and use the Rubicon Super-Flex joint, which the brand says allows extra axle articulation off road. Adjustment runs from factory length to one inch longer, which is used to set pinion, caster and wheelbase.
Key features
- Fully adjustable rear lower position, sold as a pair
- Rubicon Super-Flex joint for axle articulation
- Thick wall DOM tubing
- Adjustment from factory length to +1 inch
- Powder coated for corrosion resistance
Rear lower arms and the axle
The rear lower arms carry the axle and control its fore and aft position, so they take a steady share of the load on every trail run. Because they connect to the axle end, their angle and length affect pinion alignment and how the axle tracks through its travel.
Adjustable rear lower arms need a check of the full range before the vehicle goes on the trail. Bushings or joints at the axle end should be inspected for wear, and the coating on the tubing should be looked at for chips that can start rust. Keep the mounting hardware tight, and re-check pinion angle after any arm change.
- Measure pinion angle after each length change
- Inspect the axle end joints for wear
- Touch up chipped powder coat to slow rust
- Check brake line and driveline clearance at full travel
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE3756 |
| UPC | 614901440645 |
| Mounting location | Rear lower |
| Adjustment | Fully adjustable, factory length to +1 inch |
| Joint | Rubicon Super-Flex |
| Tubing | Thick wall DOM |
| Finish | Powder coat |
| Quantity | Pair |
Vehicle fitment
It is for the Jeep JK Wrangler, covering the 2007-2018 model years.
These are rear lower arms, sold as a pair. Confirm fit for your vehicle’s year, model and trim before ordering, including any TJ or LJ application.
Installation notes
Because the arms are fully adjustable, set pinion angle and caster once they are installed and the vehicle is at ride height. The rear lower position carries the axle, so check clearance at full articulation.
What’s included
A pair of rear lower control arms.
Not included: the mounting brackets and hardware for the arm ends.

