Overview
The Rubicon Express RE7145T is a 3.5-inch sport lift kit with twin tube shocks included, built for 4-door Jeep JK models. The sport design corrects steering and control arm geometry that a lift can disturb. It reduces bump steer and increases anti-dive, which supports better braking.
The sport kit improves ride quality and handling on any 07+ JK or JK Unlimited with a 3.5-inch suspension lift, which places it on the 2007-2018 Jeep Wrangler (JK). The package includes a high steer kit, control arm geometry correction brackets, rear cam bolts for pinion adjustment, bump stops and extended sway bar end links. The lift range covers 3 to 4.99 inches, and the kit can be upgraded to Super-Flex later.
Key features
- 3.5-inch lift height with front and rear replacement coil springs
- Twin tube shocks included
- New high steer kit with a solid drag link
- Steering stabilizer relocated above the drag link for ground clearance
- Control arm geometry correction brackets
- Rear cam bolts for pinion angle adjustment
- Rear track bar bracket and extended sway bar end links
- Bump stops
Before you buy
A sport lift changes the geometry that steering and control arms rely on, so a lift at this height is best judged as a complete system rather than a single part. Steering components, control arms and the driveline all shift when the body rides higher, which is why the parts in this kit are installed together. Before you buy, look at how often you drive on pavement compared with trail use, because that balance decides how much ride and braking focus you need from the setup.
Think about the parts that tend to wear sooner after a lift. Tie rod ends, drag link joints and bushings take extra load when the axle sits at a new angle, so inspect them during the first service interval. Plan for a wheel alignment after installation, and keep a record of the settings so future work can be compared. Tire size matters too, since a larger tire changes steering effort and clearance in ways the lift alone does not address.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7145T |
| UPC | 700007257291 |
| Lift height | 3.5 inches (chart range 3 to 4.99 inches) |
| Body style | 4-door models |
| Coil springs | 3.5-inch front and rear replacement |
| Shocks | Twin tube, included |
| Made in | USA |
Vehicle fitment
Any 07+ JK or JK Unlimited with a 3.5-inch suspension lift falls within this kit’s coverage, the 2007-2018 Jeep Wrangler (JK).
Confirm your vehicle’s year, model and trim before ordering. This kit is for 4-door models, so check your body style first.
Installation notes
The high steer kit and control arm brackets change steering and control arm geometry, so the alignment and steering should be checked after installation. The rear cam bolts adjust pinion angle, which should be confirmed once the install is finished.
What’s included
The kit includes the high steer kit, control arm geometry correction brackets, rear cam bolts, 3.5-inch front and rear coil springs, the rear track bar bracket, extended sway bar end links, bump stops and twin tube shocks.






