Select your vehicle

Rubicon Express 2.5/3.5″ Sport Kit with FOX 2.5 Non-Resi Shocks – JT7104FP

Rubicon Express

Shop Jeep Gladiator Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2020-2026 Jeep Gladiator JT
  • 2.5/3.5 inch Sport Kit with coil springs
  • FOX 2.5 non-resi shocks included
  • 100% bolt on; tire size 35 inch

Description

Overview

The Rubicon Express JT7104FP is a 2.5/3.5 inch Sport Kit with FOX 2.5 non-resi shocks for the 2020-2026 Jeep Gladiator JT. It is a coil spring lift kit with FOX Performance Series shocks included at the front and rear.

The system needs no driveshaft change and no exhaust or brake line modification, and it is a 100% bolt on design. It provides a lift height range of 0-3.5 inches, is built for a 35 inch tire size, and has room for 37 inch tall tires.

FOX Performance Series shocks are covered by the FOX warranty and do not qualify for the Rubicon Express Advantage Warranty.

Key features

  • 2.5/3.5 inch lift for the Jeep Gladiator JT
  • Sport Kit with coil springs
  • FOX Performance Series shocks included front and rear
  • 100% bolt on design
  • No driveshaft, exhaust or brake line changes needed.
  • Tire size 35 inch; room for 37 inch tall tires

Choosing coil spring lift gear

Coil spring kits raise the vehicle by changing the spring seat height, so ride and suspension geometry shift with the new height. Because the springs and shocks carry more load at a higher ride height, the rest of the suspension works harder over time. Bushings, ball joints and tie rod ends are often inspected at the same time as the springs, since they wear faster once the vehicle sits higher.

When choosing a lift, weigh the height you need against how the vehicle will be used. Heavier tires and bumpers add load, and wheel offset changes how the tires sit under the fender. Steering geometry and driveline angles also change, so plan for an alignment and a check of the brake lines after installation.

  • Check brake line length at full droop
  • Inspect control arm bushings after the first drives
  • Recheck fastener torque after initial use

Specifications

Brand Rubicon Express
Part number JT7104FP
Part type Suspension lift kit, Sport Kit
Lift 2.5-3.5 inch suspension lift kit
Lift height range 0-3.5 inches
Rear lift method Coil springs
Shocks FOX Performance Series, front and rear, included
Tire size 35 inch
Fit type Direct fit
Distributor part number R/EJT7104FP

Vehicle fitment

The manufacturer fitment list for the Rubicon Express JT7104FP includes:

  • 2020–2026 Jeep Gladiator (Launch Edition, Overland, Rubicon, Sport, Sport S)

It is designed for the Jeep Gladiator JT from 2020 to 2026. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

A lift kit changes how the vehicle steers, brakes and handles, so professional installation is recommended.

Support the frame on jack stands and set the suspension at ride height before torquing each bolt to its specified value. Check the alignment afterward.

Look over brake lines, wiring and the driveshaft for clearance at full droop, and confirm the finished height is legal where you drive.

Note your torque values and check them again after the first few hundred miles of driving, since springs and bushings settle in service.

What’s included

Coil spring lift kit with FOX Performance Series shocks, front and rear.

Not included: Check the package contents against your installation before starting.

SKU: R/EJT7104FP Categories: ,

Fitment

VehicleYearsTrims
Jeep Gladiator2020–2026Launch Edition, Overland, Rubicon, Sport, Sport S

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What vehicle does the Rubicon Express JT7104FP fit?

It fits the 2020-2026 Jeep Gladiator in Launch Edition, Overland, Rubicon, Sport and Sport S trims, per the manufacturer fitment list.

Does the JT7104FP include shocks?

Yes. Shocks are included, and the kit uses FOX Performance Series shocks at the front and rear. These FOX 2.5 non-resi shocks are covered by the FOX warranty rather than the Rubicon Express Advantage Warranty.

What tire size does the JT7104FP accommodate?

The kit is built for 35 inch tires and has room for 37 inch tall tires. Confirm tire clearance at full steering and suspension travel before installing larger tires.

Does the JT7104FP need driveshaft or exhaust changes?

No. The kit uses a 100% bolt on design, so no driveshaft, exhaust or brake line changes are needed. It is designed to improve street handling and off-road capability.

Does a lift kit change the factory alignment?

Yes. Changing ride height alters caster and camber, so an alignment is normally needed after installation. Recheck bolts and bushings after the first few hundred miles of driving, since the new parts settle in service.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Gladiator Lift Kits on Amazon