Overview
The Rubicon Express JL7134T is a 2-inch economy suspension lift kit with twin tube shocks for the 2018–2026 Jeep Wrangler JL. It is a direct fit for both 2-door and 4-door JL models.
The kit uses urethane coil spacers, sway bar drops and bump stop extensions to keep the factory springs and dampers. The system makes room for 35-inch tall tires, and up to 37-inch tires on Rubicon models.
The twin tube shocks are included at the front and rear, and the specifications list a block and spacer rear with a coil spring component. The lift height range is 0 to 3.5 inches.
Key features
- Twin tube shocks at the front and rear, included
- Urethane coil spacers that retain factory springs and dampers
- Sway bar drops and bump stop extensions
- Room for 35-inch tall tires, and up to 37-inch tires on Rubicon models
- Economy kit in the Rubicon Express lift line
Economy lift considerations
An economy lift keeps the factory springs and dampers, so the ride height gain is modest and the original suspension character stays largely in place. Spacers and drops raise the body and change how the sway bar and bump stops work at full travel. This type of kit suits drivers who want more tire room without replacing every suspension component.
Before buying, consider how the lift changes the driveline angles, the brake hose length and the headlight aim, since these are commonly adjusted after a lift. Shocks and bump stops should be inspected for wear at the same time, as worn parts can reduce the benefit. Check the steering and alignment once the kit is in place.
- Inspect factory bump stops for cracking
- Check brake lines for stretch at the new height
- Re-align the front end after installation
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EJL7134T (JL7134T) |
| Kit type | Economy 2-inch lift kit |
| Lift height range | 0 to 3.5 inches |
| Tire size | 35 inches |
| Front shocks | Twin tube |
| Rear shocks | Twin tube |
| Rear lift method | Block and spacer |
| Rear lift component | Coil spring |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler (JL) in the 2-door and 4-door trims, including the 80th Anniversary, Freedom, Islander, Moab, Rubicon, Sahara, Sport, Sport S, High Altitude, Willys and Willys Sport models, and the 4xe and 392 versions.
Earlier Wrangler generations such as the JK and TJ, and the Gladiator, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Twin tube shocks at both ends need to be checked for length once the kit is in place. The sway bar drops and bump stop extensions should be set up as described so the geometry holds at the new height.
What’s included
The kit includes the twin tube shocks at the front and rear, the urethane coil spacers, sway bar drops and bump stop extensions.
