Overview
The Rubicon Express JT7145NR is a 4.5/5.5 inch sport suspension lift kit with geometry correction brackets and 2.5-inch monotube shocks for the 2020–2026 Jeep Gladiator JT. It is a direct fit for the 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims.
The correction brackets adjust steering and control arm geometry, which reduces bump steer and increases anti-dive for steadier braking. The rear lift uses coil springs, and the lift height range is 4 to 5.5 inches.
The specifications list 2.5-inch monotube shocks at the front and rear as included, and a 37-inch tire size.
Key features
- 4.5/5.5 inch sport suspension lift
- Geometry correction brackets for steering and control arm geometry
- Designed to reduce bump steer through corrected steering geometry.
- 2.5-inch monotube shocks at the front and rear, included
- Clearance for 37-inch tires, per the specifications
Alignment after a sport lift
Raising a Gladiator changes the angles of the control arms and steering links, and those angles drive how the truck tracks and steers. Geometry correction brackets bring the steering and control arm angles back in line, which reduces bump steer and changes how the front end dives under braking.
Steering components often show their age after a lift. Check the tie rod ends, drag link and track bar for play before the alignment is set, because a worn joint makes it hard to hold the new geometry. Brake lines and driveline angles should also be checked since the body height has changed.
- Measure driveline angles at the new height
- Check bump steer after the alignment is complete
- Look for play in tie rod and drag link ends
- Re-check bolts after the first few drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EJT7145NR (JT7145NR) |
| Kit type | Sport suspension lift kit |
| Lift | 4.5/5.5 inch |
| Lift height range | 4 to 5.5 inches |
| Tire size | 37 inches |
| Front shocks | 2.5 monotube |
| Rear shocks | 2.5 monotube |
| Rear lift method | Coil springs |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
Fitment covers the 2020–2026 Jeep Gladiator JT in the 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims.
The Wrangler and any Gladiator year outside 2020–2026 fall outside this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets change the control arm and steering geometry, so the alignment and bump steer should be checked after the install, and the driveline angles measured at the new height.
What’s included
The specifications list 2.5-inch monotube shocks at both ends, coil spring rear lift components and geometry correction brackets as part of this sport kit.


















