Overview
The Rubicon Express 3.5 Inch Extreme-Duty Long Arm Lift Kit with Rear Track Bar and Twin Tube Shocks (part number RE7203T) is a long arm suspension lift for the Jeep TJ. The listed lift height range is 3 to 4.99 inches, and the kit comes with twin tube shocks.
The long arms are longer than a standard short arm set, which improves lifted suspension geometry. The design adds stability on and off road, reduces torque roll and improves trail traction.
Key features
- Chromoly long control arms
- PT-Meg Super-Ride bushings for on- and off-road use
- Adjustable control arms with serviceable Super-Flex spherical ball joints
- Tuned lift springs
- Twin tube shocks included
- Rear track bar included
- Front and rear stainless brake lines
- Three-piece belly pan for transfer case and transmission access
Plumbing and belly pan clearance
Stainless brake lines run from the frame to the axle, and a longer suspension moves the lines through a wider arc. Check that the lines have enough slack for full compression and droop, that they do not rub the frame or the arms, and that the fittings are not under tension at either end of travel.
The three-piece belly pan protects the transfer case and transmission but needs room to sit clear of the new arms and crossmember area. Once the kit is in, check the pan at full travel and after the first few drives, and tighten any fasteners that have loosened.
- Look for rubbing at brake line brackets
- Confirm the pan clears the transfer case
- Recheck fasteners after the first drive
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7203T |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Extreme-Duty long arm |
| Rear lift method | Coil springs |
| Shock absorbers | Twin tube, included |
| Track bar | Rear, included |
| Brake lines | Front and rear stainless |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 1997–2006 Jeep Wrangler (TJ) with no trim limit.
The LJ, JK and JL Wranglers are not covered by this kit, and the Gladiator is not covered either. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A long arm system replaces the factory control arms and changes the suspension geometry. Set the alignment and check the driveline angles after installation, and confirm the belly pan clears the transfer case and transmission.
What’s included
Chromoly long arms with PT-Meg bushings and Super-Flex spherical ball joints, tuned lift springs, a rear track bar, twin tube shocks, front and rear stainless brake lines and a three-piece belly pan.


