Overview
The Skyjacker RBL90 is a single rear stainless steel brake line for the 1980–1998 Ford F-250, the 1997 F-250 HD and the 1980–1997 F-350, made for 4 to 6 inches of lift.
The braided stainless line has a heavy-duty off-road brass fitting and an extruded polyurethane outer coating. It is DOT certified and approved to European T.U.V. standards.
Key features
- Rear line, one per box
- For lifts of 4 inches to 6 inches
- Braided stainless steel
- Polyurethane outer coating
- Brass fitting for off-road use
- DOT certified, T.U.V. approved
- Limited lifetime warranty
Routing and wear on rear lines
A rear brake line carries fluid from the axle area to the wheel side and must stay clear of moving parts. Lifting a truck changes the angle at the axle, so the line bends further than it did stock. Routing it without tension keeps the braid from stretching at the fittings.
Inspect the line at each service. Look for chafing where it touches the axle tube, spring or frame, and for kinks, dents or a coating that has split. Fittings should be dry; any fluid beside a flare means the connection needs attention before the truck is driven.
- Check clearance through full suspension travel
- Replace the line and its flare fittings as a set
- Bleed the rear brakes after any line is disconnected
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | RBL90 |
| UPC | 803696155937 |
| Type | Braided stainless steel brake line |
| Position | Rear |
| Quantity | Single |
| Lift height | 4 inches to 6 inches |
| Fittings | Heavy-duty off-road brass |
| Outer coating | Extruded polyurethane |
| Approvals | DOT certified, European T.U.V. approved |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1980–1998 Ford F-250, the 1997 F-250 HD and the 1980–1997 Ford F-350.
The Bronco and F-150 are not on this list, and neither are F-250 trucks built before 1980. Confirm your vehicle’s year, model and trim before ordering.








