Select your vehicle

Tuff Country Stainless Steel Braided Brake Hose – 95410

Tuff Country

Shop Jeep CJ7 Brake Hoses on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front stainless brake hose for 1982–1986 Jeep CJ7, 1982–1983 CJ5 and Scrambler
  • 3 inches over stock; 2 required
  • PTFE inner bladder, braided stainless exterior, DOT approved

Description

Overview

The Tuff Country 95410 is a pair of front stainless steel braided brake hoses, 3 inches longer than stock, for the 1982–1983 Jeep CJ5, the 1982–1986 CJ7 and the 1982–1985 Scrambler.

The hoses use a PTFE inner bladder shielded by a braided stainless steel exterior, a design intended to help resist dry rot. They are DOT approved, and two are needed, one for each front wheel.

Key features

  • Front position, 2 required
  • 3 inches over stock length
  • PTFE inner bladder
  • Braided stainless steel exterior that Tuff Country says helps prevent dry rot
  • DOT approved
  • Direct-fit design

Brake hose care and routing

A flexible brake hose lets the wheel travel and steer while the brake line stays connected to the chassis. Braided stainless exteriors add protection from abrasion and road debris, while the inner liner carries the fluid. Even with a durable hose, the routing matters. The hose should not touch the steering arm, tie rod or spring at full lock or full travel, and it should have a gentle curve rather than a tight bend.

After replacement, bleed the brakes to remove air and check the pedal feel before driving. Inspect the fittings for seeping fluid at the first service and again after the first few weeks of use.

  • Check clearance at the steering arm and tie rod
  • Bleed the brakes after replacement
  • Inspect fittings for seeping fluid

Specifications

Brand Tuff Country
Part number 95410
UPC 698815954108
Type Braided stainless steel brake hose
Position Front
Quantity required 2
Extra length 3 inches over stock
Inner liner PTFE bladder
Outer layer Braided stainless steel
Fitment type Direct fit
Standard DOT approved

Vehicle fitment

It fits the 1982–1983 Jeep CJ5, the 1982–1986 Jeep CJ7 and the 1982–1985 Jeep Scrambler.

CJ5 and CJ7 models built before 1982 are not on this list, and the Wrangler YJ is not covered. Confirm your vehicle’s year, model and trim before ordering.

SKU: T/C95410 Category:

Specification

Shipping weight 2.00 lbs
Package dimensions 9.00 × 4.00 × 4.00 in
brands

Fitment

VehicleYearsTrims
Jeep CJ51982–1983Base, Laredo, Limited, Renegade
Jeep CJ71982–1986Base, Laredo, Limited, Renegade
Jeep Scrambler1982–1985Base, Laredo, Renegade, SL, SR

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

How many Tuff Country 95410 hoses do I need?

Two are needed, one for each front wheel. Each hose is 3 inches over stock length. Install both hoses together so the brake lines match in length and routing.

What is inside the Tuff Country 95410 hose?

It has a PTFE inner bladder shielded by a braided stainless steel exterior. That design is intended to help resist dry rot.

Does the 95410 fit a 1980 CJ7?

No. The fit covers the CJ7 from 1982 to 1986, so a 1980 CJ7 is outside that range. Confirm fit for your vehicle's year, model and trim before ordering.

How often should brake hoses be inspected?

Inspect them at every service and any time the wheels come off. Look for cracks, bulges, leaks at the fittings and rubbing against suspension parts. Replace any hose that shows damage.

Do the front hoses need bleeding after replacement?

Yes. After replacing a flexible hose, bleed the brakes to remove air, starting at the wheel farthest from the master cylinder. Check the pedal feel before driving on the road.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep CJ7 Brake Hoses on Amazon