Overview
The Crown Automotive 52008391 is a rear rubber brake hose for the 1997–2006 Jeep Wrangler (TJ) with rear drum brakes. It is a direct-fit replacement at the rear position.
Key features
- For Wrangler TJ models with rear drum brakes
- Rear position
- Rubber hose
- Stock length
- Direct-fit replacement
Drum brake hose basics
Brake hoses carry fluid from the chassis to the moving parts, so they flex with every suspension movement. On a TJ with rear drum brakes, the rear hose connects the rigid line to the wheel cylinder area, where pressure has to hold steady during every stop. Rubber hoses are common on older Jeeps because they tolerate movement well, but they can soften, crack or swell with age.
Replace a hose when its outer cover shows cracks, bulges, or wet staining near the fittings. Check the hose for twisting, since a hose that is turned during installation can rub and fail early. Inspect the hose when the rear brake shoes or drums are serviced, because that is when the connection is most accessible.
Brake fluid should be fresh when the hose is replaced, and the system should be bled after the new hose is in place. Air that remains in the lines makes the pedal feel soft. Keep the fluid level in the master cylinder watched during the bleeding work.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52008391 |
| UPC | 848399014099 |
| Position | Rear |
| Type | Rubber |
| Brake system | Rear drum brakes |
| Length | Stock |
| Size | 0 inches to 2 inches |
| Fit | Direct fit |
Vehicle fitment
It is a direct fit for the 1997–2006 Jeep Wrangler (TJ) with rear drum brakes.
The YJ before 1996 and the JK after 2006 are not covered, and a TJ with rear disc brakes needs a different hose. Confirm your vehicle’s year, model and trim before ordering.









