Overview
The Rough Country Rear CV Drive Shaft, part R/C5084.1, is a double cardan style rear driveshaft for Jeep Cherokee XJ models equipped with 4 to 6 inch suspension lifts. It is the automatic-transmission version and is meant to prevent driveline vibration and breakage of the rear output shaft.
It fits 1984–2001 Jeep Cherokee (XJ) models and requires a slip yoke eliminator.
Key features
- Double cardan style CV rear shaft
- Recommended for XJ lifts of 4 to 6 inches
- Helps prevent driveline vibration
- Helps prevent breakage of the rear output shaft
- Extended length, direct fit
Choosing a rear driveshaft
A rear driveshaft carries power from the transfer case or transmission to the rear axle, and its job gets harder when a lift changes the driveline angle. Double cardan and CV-style joints are designed to handle higher angles more smoothly than a basic single joint. Matching the shaft to your lift height helps keep vibration down at highway speeds.
Driveshafts wear at the joints, yokes and output connections. When swapping a shaft, inspect the transmission output and the rear yoke for play or leaks, since worn parts can cause vibration with a new shaft. Keep the slip yoke eliminator and any related hardware together during installation so nothing is missed.
- Measure driveline angles after the lift is installed
- Inspect the rear output shaft and yoke for wear
- Check the transfer case and axle seals for leaks
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C5084.1 |
| Position | Rear |
| Transmission type | Automatic |
| Length | Extended |
| Joint type | CV, double cardan style |
| Recommended lift | 4 to 6 inches |
| Slip yoke eliminator | Required |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ), across the model years and trims in that range.
Confirm fit for your vehicle’s year, model and trim before choosing this part.
Installation notes
A slip yoke eliminator is required, so plan for one when fitting the shaft. The shaft is a rear unit only and does not replace a front driveline.
What’s included
One rear CV driveshaft. A slip yoke eliminator is not included and is required for this shaft.









