Overview
The Rough Country N3 rear shock R/C23158_E is a nitrogen-charged rear shock for 2015–2022 Chevrolet Colorado and GMC Canyon trucks with a 6.5 to 8 inch lift. It uses eyelets at the top and bottom and is sold as a pair.
It is the rear shock for the tallest lift range in this group of N3 rear shocks, with an extended length of 30 in and a collapsed length of 17.56 in. The 35mm piston, 18mm chrome-hardened piston rod and 54mm body follow the N3 build, and the ten-stage variable valving is tuned for a truck at a high ride height.
Key features
- Nitrogen charged shock body
- 10-stage variable valving
- 35mm piston and 18mm chrome-hardened piston rod
- 54mm shock body designed to shed heat faster
- Rated to 36kN tensile strength
- Spring-loaded piston rod seal
- Rubber bushings and military spec damper fluid
Setting up for a high lift
At a higher ride height the rear shock is extended further through its travel, so its position and angle relative to the axle change. Eyelet mounts pivot in one plane, which suits this kind of geometry, but the upper and lower mounts should still sit square and free of binding after installation.
A lift of this range often comes with other changes, such as longer brake lines, a driveshaft that operates at a steeper angle and different track bar geometry. Check these items when you plan the install, because the rear shock is only one part of the rear suspension. Adjustable or extended-travel parts may be considered when the suspension height changes.
Inspect the shock and its bushings every few months of regular use. Look for oil on the body, cracked rubber, and loose bolts at the mounts. Early attention to these signs helps the rear end stay predictable on the trail and on the road.
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C23158_E |
| Product line | N3 Performance |
| Position | Rear |
| Lift height | 6.5-8 in. |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Extended length | 30 in |
| Collapsed length | 17.56 in |
| Body diameter | 54mm |
| Piston | 35mm |
| Piston rod | 18mm chrome-hardened |
| Charge | Gas charged, nitrogen |
| Valving | 10-stage variable |
| Tensile strength | 36kN |
| Fluid | Military spec, rated to -40 C |
| Finish | Metallic silver paint |
| Warranty | The shock carries a 3-year warranty. |
| Sold as | Pair |
Vehicle fitment
It is made for the 2015–2022 Chevrolet Colorado in its Base, LT, WT, Z71 and ZR2 models, and for the 2015–2022 GMC Canyon in its base, All Terrain, Denali, Elevation, SL, SLE and SLT models. It is sized for a 6.5 to 8 inch lift.
The list covers the 2015–2022 Colorado and Canyon only, so earlier generations and other GM trucks are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
At this lift height, check the rear ride height and the driveline angles after installation. Confirm the eyelet mounts fit your rear brackets before ordering.
What’s included
Sold as a pair, with one rear shock for each side.









