Overview
The Rough Country 6-inch Ford F-150 suspension lift kit, part number R/C40630, fits the 2021–2026 Ford F-150 in the King Ranch, Lariat, Limited, Platinum, SSV, XL and XLT versions. It gives the fourteenth-generation F-150 an aggressive stance and clearance for up to 35-inch tires with proper wheel spacing.
The kit includes lifted knuckles and strut spacers, along with front and rear crossmembers with a laser-cut RC logo. The rear blocks are fabricated rather than cast and are engineered to prevent axle wrap.
It comes with N3 rear shocks and a block and u-bolt rear lift, and the shocks are included with the kit. The bolt-on installation can be done at home and takes an estimated 7 to 8 hours.
Fabricated rear blocks are used instead of cast units.
Key features
- Lifted knuckles and strut spacers
- Front and rear crossmembers with a laser-cut RC logo
- Fabricated rear blocks engineered to prevent axle wrap
- N3 rear shocks
- Clearance for up to 35-inch tires with proper wheel spacing
- Limited lifetime replacement warranty for manufacturer defects
Setting up a lifted F-150
Lifting a fourteenth-generation F-150 changes its steering geometry, which is why alignment matters so much after installation. Fabricated rear blocks help control axle position, but the rear driveline still needs a check for angle and vibration once the truck is back on the road.
Wheel and tire choice comes next. Tires near the upper end of the clearance range need enough backspacing to clear the fender at full travel. Inspect the lifted front components regularly, looking for worn ball joints, loose strut hardware and any sign that a bolt has backed off.
Keep a torque wrench in the truck for the first few weeks, since newly installed hardware often settles. Re-torque the crossmember and block fasteners on a regular schedule, and record each check so any change is caught early.
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C40630 |
| Lift kit | 6 inches |
| Rear shocks | N3 |
| Rear lift method | Block or spacer |
| Rear lift component | Block and u-bolt |
| Tire size | 35 inches |
| Lift height range | 6 to 7 inches |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2021–2026 Ford F-150 in the King Ranch, Lariat, Limited, Platinum, SSV, XL and XLT versions.
F-150 model years before 2021, including the 2015–2020 trucks, and the Ford Super Duty are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bolt-on installation can be done at home and takes an estimated 7 to 8 hours. Have the alignment checked afterward, since the lifted knuckles change the front geometry.
What’s included
Lifted knuckles, strut spacers, front and rear crossmembers, fabricated rear blocks, the block and u-bolt rear components and N3 rear shocks.











