Overview
The Rough Country 43130 is a 5″ suspension lift kit with N3 shocks for the 1998–2011 Ford Ranger and the Mazda B3000 and B4000 pickups of the same period.
The kit is backed by a Lifetime Replacement Guarantee. It raises the rear with blocks and U-bolts, with a lift height range of 4-5.5 inches.
The Rough Country 43130 is sold as the 5″ Ranger lift kit with N3 shocks. Rough Country says its lift kits offer off-road performance, make it possible to run larger tires, and are easy to install.
The kit has N3 shocks in the front and rear. The rear lift uses a block and U-bolt set. The catalog number is R/C43130, and it covers Ford Ranger and Mazda B-Series trucks from 1998.
Key features
- 5 in. suspension lift kit
- Lift height range 4-5.5 inches
- N3 shocks, front and rear
- Rear lift with blocks and U-bolts
- Direct fit
- Lifetime Replacement Guarantee.
Choosing a lift height
A 5 inch lift changes more than ride height. Taller suspension moves the axles and driveline angles, so the driveshaft, u-joint angles, brake lines and wiring may need a check after the install. Lift kits with blocks and U-bolts are often chosen for a simple rear setup, but the rear axle still needs its pinion angle confirmed once the truck settles at its new height. Larger tires also add load to the steering and gears, so tire size belongs in the same decision.
Shocks matter too. Matched shocks help the suspension keep control after the height changes, and an older shock set can feel too short at the new geometry. Replace worn bushings, ball joints and tie rod ends while the front end is apart, since those parts are easier to reach during a lift. Plan a re-check of alignment and headlight aim after the first few drives.
- Check driveline angles after the lift
- Inspect brake lines and wiring for stretch
- Recheck U-bolt torque after the first drive
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 43130 |
| Catalog number | R/C43130 |
| Part type | Suspension lift kit |
| Lift | 5 in. |
| Lift height range | 4-5.5 Inches |
| Shocks series | N3 Shocks |
| Front shocks | N3 Shocks |
| Rear shocks | N3 Shocks |
| Rear lift component | Block and u-bolt |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Rough Country 43130 covers the 1998–2011 Ford Ranger (EV, Edge, FX4, STX, Splash, Sport, Tremor, XL, XLT), the 1998–2007 Mazda B3000 (Base, DS, SE, SX, Troy Lee) and the 1998–2009 Mazda B4000 (Base, DS, SE, Troy Lee).
The list does not include Ranger model years after 2011, the Ford F-150, or other Mazda pickups. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Have a professional shop install this kit. Follow the included step order, torque every fastener to specification, retighten after the first drive, and have the alignment and headlight aim checked once the truck sits at its new height.
What’s included
Details on the Rough Country 43130 lists N3 shocks for the front and rear and a block and U-bolt rear lift component.
Not included: Confirm which additional parts your lift needs before starting the install.











