Overview
The Rough Country 62100 is a 2-inch suspension lift kit for the Jeep Compass and Jeep Renegade. It is a leveling kit for the Renegade and levels the vehicle from front to rear for an aggressive look. The Compass fit covers 2014 to 2021 models in the 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Latitude, Limited, Sport, Trailhawk and Upland versions, and the Renegade fit covers 2015 to 2021 models in several versions.
Each kit includes front and rear strut spacers that are laser cut for a precise fit and powder coated black for resistance to the elements. Installation does not require complicated strut disassembly. The lift is 2 inches with a block rear lift component and a lift height range of 0 to 3.5 inches.
Key features
- 2-inch lift from front and rear strut spacers
- Laser cut spacers for a precise fit
- Powder coated black finish
- No complicated strut disassembly required.
- Increased ground clearance for larger tires and wheels
- Lifetime replacement guarantee.
Leveling and ride height
Leveling kits and strut spacers raise the front or both ends by a small amount, which can correct a nose-low stance or add clearance for slightly larger tires. Strut spacers change the spring seat position without replacing the struts, so the ride feel changes only a little. The shock length does not change, so the travel available to the shock is slightly reduced at full compression.
A taller stance changes the steering and driveline angles, so alignment and front-to-rear level should be checked after installation. Spacers sit under the strut mount, which is a load path, so the nuts and bolts should be checked periodically. Pay attention to the brake hose and sway bar link length, since they can be stretched or loaded differently after the change.
- Check front-to-rear level on a flat surface
- Recheck strut mount nuts after the first drive
- Inspect brake hose length for stretch
- Look for rubbing at full steering lock with larger tires
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 62100 |
| Lift size | 2 inches |
| Lift height range | 0 to 3.5 inches |
| Front component | Laser cut strut spacer |
| Rear component | Strut spacer, block |
| Finish | Powder coated black |
| Warranty | Lifetime replacement guarantee. |
| Fitment type | Direct fit |
Vehicle fitment
Covers 2014 to 2021 Jeep Compass models and 2015 to 2021 Jeep Renegade models, across the versions covered for each.
Renegade fit is covered for 2015 to 2021 and Compass fit for 2014 to 2021. Model years 2013 and earlier and 2022 and later are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Installation does not require complicated strut disassembly. Leveling changes the height at both ends, so check the front and rear for level after installation, and an alignment is recommended for any change in ride height.
What’s included
The kit includes a set of front and rear strut spacers, laser cut and powder coated black. Check the package contents against your installation before starting.














