Overview
The Rough Country 6-inch Chevrolet Silverado 1500 suspension lift kit with N3 shocks, part number R/C21731D, fits the 2020–2021 Chevrolet Silverado 1500 in the High Country, LT, LTZ and RST versions, and the 2022 Chevrolet Silverado 1500 LTD in the Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV and WT versions.
The lift levels the truck for a commanding stance and gives enough clearance for 35×12.50 tires on 10-inch wide wheels. It keeps the stock track width, which allows up to a 10-inch wide wheel with 4.5 inches of backspacing.
The product fields list N3 rear shocks and no front shocks, so the kit is listed with N3 rear shocks only. The kit includes front and rear crossmembers, a skid plate and cast steel knuckles.
Key features
- 6-inch lift that levels the truck
- N3 rear shocks
- Clearance for 35×12.50 tires on 10-inch wide wheels
- Stock track width retained
- Front and rear crossmembers, a skid plate and cast steel knuckles
- Listed lift height range of 6 to 7 inches
Wheel choice before installation
Wheel selection matters more than usual on a lift with this geometry. Backspacing controls how far the wheel sits inside the fender, and the wheel width determines how much room the tire has when it turns. Test fit each wheel before the final install.
Front shocks are not part of this kit, so the factory front shocks remain in use. Inspect them for leaks and worn mounts after installation, since a higher ride height puts different loads on them. The rear shocks should be checked at the same time for proper mounting.
Plan the install in a clear garage space with jack stands set, and check the cutting and drilling areas before starting. Keep track of all the fasteners removed, since a few bolts are used in more than one step.
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C21731D |
| Lift size | 6 inches |
| Front shocks | None |
| Rear shocks | N3 |
| Rear lift method | Block or spacer |
| Rear lift component | Block and u-bolt |
| Tire size | 35×12.50 |
| Wheel width | Up to 10 inches |
| Wheel backspacing | 4.5 inches |
| Lift height range | 6 to 7 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2021 Chevrolet Silverado 1500 and the 2022 Chevrolet Silverado 1500 LTD.
It does not fit GMC Sierra models, which use part number 22930, or Trail Boss models, which use part number 27530. Factory wheels are not compatible, and 2019 Classic models are excluded.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cutting and drilling are required. Test fit the wheels before installation, since 20-inch or larger aftermarket wheels with 4.5-inch backspacing are needed to fit.
What’s included
Front and rear crossmembers, a skid plate, cast steel knuckles, the rear N3 shocks and the block and u-bolt rear components.













