Overview
The Rough Country 3-inch Toyota suspension lift kit, part number R/C76657, fits the 2003–2024 Toyota 4Runner and the 2007–2014 Toyota FJ Cruiser. It adds ground clearance and a level look from front to rear with lifted coil spring spacers and strut extensions.
The kit includes front Vertex adjustable reservoir shocks and rear V2 monotube shocks. Installation is 100% bolt-on and can be done in a home garage with common tools.
Coil spring spacers fit between the spring and its seat, adding height without changing the spring rate. Strut extensions lengthen the front strut so the front lift can match the rear.
Vertex adjustable reservoir shocks use a separate reservoir for the gas, while monotube shocks use a single tube. That is why the front and rear shock types differ on this kit, and both sets are included, so the kit provides front and rear shocks rather than only one end.
Key features
- Lifted coil spring spacers provide ride height
- Strut extensions for the front
- Front Vertex adjustable reservoir shocks
- Rear V2 monotube shocks
- 100% bolt-on installation
- Listed lift height range of 0 to 3.5 inches
Coil spacers and strut extensions
Coil spacers sit between the spring and its seat, so the spring keeps its rate while the body rises. Strut extensions lengthen the front strut to match the rear height, which keeps the front and rear lift balanced. The setup works best when both ends are checked against each other after installation.
Lifted 4Runners and FJ Cruisers see more wheel travel and steering load, so fasteners, spacer seats and strut mounts deserve regular inspection. Watch for shifting spacers, clunks over bumps or uneven tire wear. Check the brake lines and driveline angles, and recheck alignment after the first few weeks of driving.
- Check spacer seats and fasteners at each tire rotation
- Inspect strut mounts for play or cracks
- Recheck brake hose length at the new height
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C76657 |
| Lift size | 3 inches |
| Front shocks | Vertex adjustable reservoir |
| Rear shocks | V2 monotube |
| Rear lift component | Coil spring spacer |
| Position | Front and rear |
| Tire size | 285 |
| Shocks included | Yes |
| Lift height range | 0 to 3.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2003–2024 Toyota 4Runner and the 2007–2014 Toyota FJ Cruiser.
Other Toyota models and model years outside those ranges are not on the list. Confirm the 4Runner year before ordering, since the 2003–2024 span is wide.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coil spring spacers and strut extensions change the ride height and alignment, so have the alignment checked after installation and check the brake lines and driveline angles.
What’s included
Lifted coil spring spacers, strut extensions, front Vertex shocks, rear V2 shocks and hardware.













