Overview
The Rough Country 19432 is a 3.5 inch suspension lift kit with upper control arms for the 2007-2016 Chevrolet Silverado 1500 and GMC Sierra 1500. Its lift height range is 0-3.5 inches, and it is a direct fit.
The kit includes N3 shocks with 10-stage variable valving, high-pressure nitrogen charging, an 18mm spring-loaded piston rod and a 54mm shock body rated up to 36kN tensile strength. The shocks have natural rubber bushings and a metallic silver finish. The kit also has POM ball joints, which are maintenance free and offer a greater range of motion than standard or OE replacements, and fabricated rear blocks, designed to be stronger than cast blocks.
Key features
- 3.5″ lift with a lift height range of 0-3.5 inches
- Includes upper control arms
- N3 shocks with 10-stage variable valving and nitrogen charging
- 18mm piston rod and 54mm shock body
- POM ball joints, maintenance free
- Fabricated rear blocks
- The new lift block replaces the factory block
- Fits models with cast steel or aluminum factory control arms
Choosing an experienced installer
Upper control arms and a lift block change the geometry of the front suspension, so camber and caster settings move with the ride height. A front-end alignment after installation keeps tire wear even and steering predictable. Because the arms and ball joints carry load, check them for play and cracks before reuse, and replace any worn bushings while the suspension is apart.
Shock choice also affects how the truck handles the new height. Valving controls how quickly the shock resists compression and rebound, which matters on rough roads and on the highway. Matching the shocks to the tires and the way the truck is used helps the ride stay controlled.
- Check brake lines and ABS wiring for stretch
- Inspect driveshaft angles at full droop
- Recheck torque on all fasteners after the first drive
- Confirm local height rules before final setup
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 19432 (R/C19432) |
| Product type | Suspension lift kit with upper control arms |
| Lift height | 3.5″ (range 0-3.5 inches) |
| Rear shocks | N3 shocks |
| Shock body | 54mm |
| Piston rod | 18mm |
| Shock tensile strength | Up to 36kN |
| Ball joints | POM, maintenance free |
| Rear blocks | Fabricated |
| Installation | Requires cutting and grinding |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Rough Country 19432 includes:
- 2007–2016 Chevrolet Silverado 1500 (Custom, High Country, Hybrid, LS, LT, LTZ, SSV, WT)
- 2007–2016 GMC Sierra 1500 (Base, Denali, Hybrid, SL, SLE, SLT, WT)
Rough Country’s notes say the kit does not fit models with factory stamped steel control arms, AWD models, 2007 Classic or old body style models, or GMC Denali models with Magnetic Ride Control. If the truck has a mass damper on the front differential, it must be removed. Retain your factory wheels with the 0.25″ wheel spacers (#1065), which are a separate part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With cutting, grinding and steering-related parts involved, this is a job for an experienced shop. Support the truck on rated jack stands on level ground, follow the installation steps and tighten every bolt to its torque specification.
Revisit the fasteners after the first drive, check that tires, brake lines and driveshafts clear through the full range of steering and travel, and get a front-end alignment. A 3.5 inch lift can fall under local height rules, so look those up.
Installation requires cutting and grinding, so plan for professional fabrication tools and experience.
What’s included
- Suspension lift kit with upper control arms
- N3 shocks
- POM ball joints
- Fabricated rear blocks
Not included: the 0.25 inch wheel spacers (#1065), which are a separate part, and wheels and tires.









