Overview
The Rough Country 3.5-inch GM bolt-on suspension lift kit, part number R/C95920, fits the 2011–2019 Chevrolet Silverado 2500 HD and 3500 HD and the 2011–2019 GMC Sierra 2500 HD and 3500 HD. It is a direct fit kit that lifts the front and rear with block and u-bolt rear components and N3 shocks at both ends.
The product fields list N3 shocks at the front and rear. The product title, however, refers to N2.0 shocks, so check the shock details before ordering if the exact shock model matters to you.
Key features
- Bolt-on suspension lift for heavy-duty GM trucks
- Block and u-bolt rear lift
- N3 shocks at the front and rear
- Listed lift height range of 0 to 3.5 inches
- Direct fit for the listed model years
Block and u-bolt rear lifts
Block and u-bolt rear lifts raise the axle relative to the springs, which changes pinion angle. A heavy-duty truck with a lift of this height is more sensitive to driveline vibration than a stock truck, so driveshaft angles should be measured after installation. Taller blocks often call for careful u-bolt length and clamp checks to keep the spring seated.
Heavy-duty trucks carry large towing loads, and the front end, steering and brakes all share that work. Inspect tie rod ends, sway bar links and brake hoses at each service. Replacing worn parts together with the lift keeps the new geometry consistent and avoids a second install.
- Measure pinion angle at ride height
- Check u-bolt torque after the first tow
- Inspect rear shock mounts for clearance
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C95920 |
| Shock series | N3 |
| Front shocks | N3 |
| Rear shocks | N3 |
| Rear lift component | Block and u-bolt |
| Lift height range | 0 to 3.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2011–2019 Chevrolet Silverado 2500 HD and 3500 HD in the High Country, LT, LTZ and WT versions, and the 2011–2019 GMC Sierra 2500 HD and 3500 HD in the Base, Denali, SLE, SLT and WT versions.
The 2020 and later HD trucks use the R/C95830 kit, and 1500 series trucks are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear block and u-bolt components change the rear axle position, so check the driveline angles and the alignment after installation.
What’s included
Front and rear N3 shocks and the block and u-bolt rear components.















