Overview
The Rough Country 6-inch Chevy suspension lift kit, part number R/C21731, fits the 2019–2021 Chevrolet Silverado 1500 and the 2022 Chevrolet Silverado 1500 LTD in Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV and WT versions. It lifts and levels the 1500 for a more commanding stance.
The kit allows 35×12.50 tires on 10-inch wide wheels. Stock track width is retained, which allows wheels up to 10 inches wide with 4.5 inches of backspacing. Each kit includes front and rear crossmembers, a skid plate and cast steel knuckles.
The kit includes an N3 rear shock, and the lift height range is 6 to 7 inches. It does not fit GMC Sierra, Trail Boss or 2019 Classic models, which other part numbers cover.
Key features
- Cast steel knuckles
- Front and rear crossmembers
- Skid plate
- Stock track width retained
- Clearance for 35×12.50 tires on 10-inch wide wheels
- Listed lift height range of 6 to 7 inches
Wheel and tire planning
Wheel choice controls how much a larger tire can clear. Backspacing and offset set the position of the wheel against the fender and the front suspension, so a wheel that looks right can still rub at full steering lock. Test fitting the wheel on the truck before the kit is installed saves rework later.
Tire weight and sidewall height also change how the lifted truck handles and how the drivetrain works. A heavier tire adds load to the front axle, and a taller sidewall changes the effective gearing. Check tire pressure and rotation at each service, and watch for uneven wear on the front tires after the lift.
- Test fit wheels before installation
- Check fender clearance at full steering lock
- Monitor front tire wear after the lift
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C21731 |
| Lift size | 6 inches |
| Knuckles | Cast steel |
| Rear shocks | N3 |
| Wheel width | Up to 10 inches |
| Wheel backspacing | 4.5 inches |
| Tire size | 35×12.50 |
| Lift height range | 6 to 7 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2019–2021 Chevrolet Silverado 1500 and the 2022 Chevrolet Silverado 1500 LTD.
It does not fit GMC Sierra, Trail Boss or 2019 Classic models. Factory wheels are not compatible, so 20-inch or larger aftermarket wheels are needed.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cutting and drilling are required for installation. Test fit the wheels before the kit is installed, and confirm the 4.5-inch backspacing requirement is met.
What’s included
Cast steel knuckles, front and rear crossmembers, a skid plate and the rear N3 shock.
The cast steel knuckles carry the front hub, and the lift changes their angle, so the alignment should be set after installation. Tire clearance depends on wheel offset and backspacing, so the 20-inch wheel requirement should be checked against the wheels on the truck.












