Overview
The Rough Country 2.5-inch suspension lift kit with N3 shocks, part number R/C91330, fits the 2018–2026 Jeep Wrangler (JL) two-door models. It adds a 2.5-inch lift front and rear, with clearance for 35-inch tires, and it fits two-door models only.
The kit includes front and rear coil springs with a linear coil rate. The design is intended to keep more lift height under load than other designs, while aiming for a smooth, factory-like ride. The nitrogen-charged N3 shocks use 10-stage variable valving with an 18mm spring-loaded piston rod and a 54mm shock body, and the seals are reinforced for longer service life.
The installation is a 100% bolt-on process, so the kit does not require cutting. The brand also cites a Lifetime Replacement Warranty.
Shock absorbers control how quickly the suspension compresses and rebounds. A shock with a different valving range changes how the ride feels on pavement and on the trail, so the shock choice matters as much as the spring choice.
Key features
- Front and rear coil springs with a linear coil rate
- Nitrogen-charged N3 shocks with 10-stage variable valving
- 18mm spring-loaded piston rod and 54mm shock body
- Reinforced seals for longer service life
- 100% bolt-on installation
- Designed for 35-inch tires, with rubbing possible at extreme articulation
Shock choice and ride feel
Shock absorbers control how quickly the suspension compresses and rebounds, so the shock tune shapes how the truck feels on pavement and on trails. Firmer valving controls body motion, while softer settings absorb more of the bumps. A matched shock and spring pair keeps the ride predictable when the lift is added.
Larger tires add weight and change the effective gearing, which can affect steering feel and acceleration. Re-check the sway-bar links and steering components after the lift, since the new geometry can load them differently. Bushings that feel worn are easier to replace while the suspension is apart.
- Check lower control arm clearance on factory wheels
- Inspect sway-bar links after the first drive
- Recheck alignment after installation
- Look for leaks from shock bodies at each service
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C91330 |
| Lift size | 2.5 inches |
| Shock series | N3 |
| Front shocks | N3, nitrogen-charged, 10-stage variable valving |
| Rear shocks | N3, nitrogen-charged, 10-stage variable valving |
| Piston rod | 18mm spring-loaded |
| Shock body | 54mm |
| Lift height range | 0 to 3.5 inches |
| Tire size | 35 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler (JL) two-door models, including the 80th Anniversary, Freedom, Islander, Rubicon, Sport, Sport S, Willys and Willys Sport versions.
Four-door Wrangler (JL) models are not covered. This kit’s fit covers the JL generation only.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
When running 35-inch tires on factory wheels, double check the clearance between the front tire, the lower control arm and the sway-bar links. Rubbing can occur at extreme articulation, so check the clearance after installation.
What’s included
Front and rear coil springs and N3 shocks for the front and rear.















