Select your vehicle
-13%

Pro Comp 3.5 Inch Rear Lift Block – 95-351

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp 3.5 inch rear lift block, part 95-351
  • Tapered cast iron riser with 9/16 inch pin size
  • Fits 1999 to 2013 Chevrolet Silverado 1500 and GMC Sierra 1500
  • Sold as each

Description

Overview

The Pro Comp Suspension 95-351 is a 3.5-inch rear lift block for the 1999 to 2013 Chevrolet Silverado 1500 and the 1999 to 2013 GMC Sierra 1500. It is a single tapered cast iron riser block with a 9/16-inch pin size.

The block is sold as each, and the number needed depends on the rear suspension. It raises the rear of the truck by 3.5 inches.

Key features

  • 3.5-inch lift height
  • Tapered cast iron riser block
  • 9/16-inch pin size
  • Rear use only

Leaf spring and pin checks

The 9/16 inch pin has to seat fully in the spring eye or perch, so the pin should be inspected for wear, rust and flat spots before the block goes in. A worn pin can let the block shift under braking, which causes noise and uneven rear travel. Added height also changes how the leaf pack flexes, so check the leaves for cracks as well.

A rear lift changes brake hose length and shock travel, so both should be checked once the truck is back at ride height. Look for shock bushings that have split, and confirm the brake lines have no tension at full droop. Retorque the U-bolts after the first few drives and inspect the block for cracks around the welds.

Specifications

Brand Pro Comp Suspension
Part number EXP95-351
Lift 3.5 in
Block style Tapered
Material Cast iron
Pin size 9/16 in
Position Rear
Sold as Each

Vehicle fitment

It fits the 1999 to 2013 Chevrolet Silverado 1500 and the 1999 to 2013 GMC Sierra 1500, including Base, LS, LT, SLE and SLT models.

Fit is limited to the 1500 series trucks named above. Check that your truck’s year, model and trim match before ordering.

Installation notes

Pro Comp says never to use a riser block on the front of any vehicle. A 3.5-inch rear block changes driveline angles, so check them after installation.

What’s included

One tapered riser block under part number 95-351.

Fitment

VehicleYearsTrims
Chevrolet Silverado 15001999–2013Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71
GMC Sierra 15001999–2013Base, Denali, HT, Hybrid, SL, SLE, SLT, WT, XFE

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 95-351 fit a 2005 Silverado 1500?

Yes. It fits the 1999 to 2013 Silverado 1500, which includes 2005 models in Base, Hybrid, LS, LT, LTZ, SS, WT, XFE and Z71 trims.

Can the 95-351 be used on the front?

No. Pro Comp says never to use a riser block on the front of any vehicle, and this block is for the rear.

What pin size does the 95-351 use?

The block has a 9/16 inch pin size. Check the pin size against your leaf spring before installing the block, since the pin has to seat properly in the spring.

Do I need longer brake lines with a rear lift?

Often a lift block can stretch the brake hoses, so they should be checked for tension at full droop. Verify the hose length and routing for your vehicle's year, model and trim before driving the truck.

Should the rear shocks be replaced with the block?

Not always, but shocks are commonly checked when a rear lift goes in. Confirm the existing shocks reach their full travel at the new ride height, and replace any that show leaks or worn bushings.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon