Overview
The Skyjacker B8535 is a front Black MAX B8500 shock absorber for the 2007–2018 Jeep Wrangler JK, in both two-door and four-door models. It is built for a lift between 1 and 3.5 inches, and it is sold individually as a twin tube hydraulic shock.
Skyjacker’s foam-cell design lets this front shock be mounted at any angle. As the oil heats up, the foam compresses to absorb the expansion, so the damping stays more consistent across hot and cold conditions.
Key features
- Front position for the Wrangler JK
- Built for a 1 to 3.5 inch lift
- Vehicle-specific multi-stage valving
- Increased fluid capacity for heat dissipation
- Sintered iron piston and chrome-plated shaft
- Black boot included
- Limited lifetime warranty
Front shock and steering
The front shocks on a Wrangler JK do more than soften bumps. They help control steering feel, body motion and tire contact on uneven ground. A front shock that has lost damping can make the steering wander or feel loose at highway speeds, so the front ends should be treated as a matched pair.
When the shock is built for a lift range, the lift on the vehicle should sit inside that range for best results. Check mounting bushings and fasteners during service, and keep the boot clean so the piston rod stays protected. Alignment is worth checking after shock replacement, because shock position changes the front geometry.
- Replace front shocks in matched pairs
- Check the boot for tears
- Inspect mounting bushings during service
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYB8535 |
| Shock series | Replacement Black MAX B8500 |
| Position | Front |
| Lift range | 1 to 3.5 inch lift |
| Shock type | Twin tube, hydraulic |
| Fitment type | Direct fit |
| Warranty | Limited lifetime warranty |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler JK in both two-door and four-door Unlimited models, including Rubicon, Sahara, Sport, Sport S and X versions and the 70th and 75th Anniversary editions.
The list does not cover the Wrangler TJ, LJ or the JL generation from 2018 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a front shock built for a lift range, check the lift height on your Jeep against the 1 to 3.5 inch range before ordering. Have the alignment checked after the shock is replaced.
What’s included
The SKYB8535 comes with its black boot. Confirm mounting hardware in the package before installation.
Not included: a second SKYB8535 shock, sold separately.









