Overview
The Skyjacker B8567 is a rear Black Max B8500 shock absorber for the 2007–2018 Jeep Wrangler JK, in both two-door and four-door models. Skyjacker designed it for a 4.5 inch lift, and it is sold as a single rear shock.
The B8567 is a twin tube hydraulic shock with a sintered iron piston and a chrome-plated shaft. Its foam-cell design lets the shock be mounted at 180 degrees.
Key features
- Rear position for the Wrangler JK
- Built for a 4.5 inch lift
- Vehicle-specific multi-stage valving
- Increased fluid capacity for MAX heat dissipation
- Twin tube construction
- Sintered iron piston and chrome-plated shaft
- Black boot included
Before you buy
Rear shocks on a Wrangler JK control how the axle moves over bumps and during braking, so a worn unit can make the back end feel loose or bouncy. Because the shock is tuned for a particular lift height, it helps to measure the suspension before buying and compare it with the setup already under the Jeep.
Shocks are usually replaced in pairs, since a single new unit can feel different from the old one on the opposite side. Bump stops, coil springs and track bars all affect how a rear shock works, so inspect them when the shock is replaced. Keep the boot clean and free of grit, and recheck the mounting bolts after the first few trail runs.
- Measure your current lift height
- Inspect bushings and bump stops
- Check the boot for cracks
- Replace rear shocks in pairs where possible
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYB8567 |
| Shock series | Replacement Black Max B8500 |
| Position | Rear |
| Lift | 4.5 inch |
| Shock type | Twin tube, hydraulic |
| Boot | Black, included |
| Warranty | Limited lifetime warranty |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler JK in both two-door and four-door Unlimited models, including the Rubicon, Sahara, Sport and X models and the 70th and 75th Anniversary editions.
The list does not cover the Wrangler TJ, LJ or the 2018 and later JL generation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the B8567 is built for a 4.5 inch lift, confirm your Jeep’s lift height before ordering. Have the alignment checked after the rear shock is replaced.
What’s included
The SKYB8567 comes with its black boot. Check the package contents against your installation before starting.
Not included: a second SKYB8567 shock, sold separately.









