Overview
The G2 Axle and Gear 1-2026-342 is a 3.42 ratio ring and pinion set for the Chrysler 9.25 inch rear axle. It fits the rear location and is matched to the axle type with a universal fit, rather than to a specific vehicle.
The set is engineered for oversized tires and high performance engines, using current technology and materials in its manufacture. The 3.42 ratio gives less torque multiplication at the wheels than a 3.73 or 4.10 set.
Key features
- 3.42 ratio rear ring and pinion set
- Chrysler 9.25 inch rear axle type
- Designed for oversized tires and high performance engines.
- Made with current technology and materials.
Gearing and tire size
Gearing is a balance between tire size, engine output and how the vehicle is driven. Larger tires already reduce the effective gearing, so a numerically lower set can leave a vehicle feeling sluggish off the line and while climbing. Before choosing, consider the tire diameter you run, the engine’s powerband and whether most driving is on pavement or on the trail. Many owners who fit larger tires change gearing at the same time to restore low-speed pull.
Break-in matters on a new ring and pinion. Gears settle as the contact pattern beds in, so gentle driving during the first stretch of use helps the surfaces seat evenly. Check the pinion nut torque and the carrier bearings after the first few runs, and listen for any change in noise. Use a gear oil suited to the axle and the load it carries, and keep the fluid at the correct level.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2026-342 |
| UPC | 631410119459 |
| Gear ratio | 3.42 |
| Axle location | Rear |
| Axle type | Chrysler 9.25 inch |
| Popular axle manufacturer | Chrysler |
Vehicle fitment
The set is matched to the Chrysler 9.25 inch axle at a 3.42 ratio. Confirm the housing size before ordering.
Only the Chrysler 9.25 inch is named for this 3.42 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload on a 3.42 set should be checked by a driveline shop, then the gears should go through a break-in period.
What’s included
A 3.42 ring and pinion set for the Chrysler 9.25 inch.









