Select your vehicle
-13%

G2 Ring and Pinion Set, Dana 35 / M190 Rear 4.88 Ratio – 2-2149-488

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Axle and Gear 2-2149-488 ring and pinion set with a 4.88 gear ratio
  • Rear axle set named for the Dana 35 and M190
  • Engineered for oversized tires and high performance engines.

Description

Overview

The G2 Axle and Gear 2-2149-488 is a 4.88 gear ratio ring and pinion set for the rear Dana 35 / M190 axle. G2 says its ring and pinion sets are engineered for demanding applications, including oversized tires and high performance engines.

The sets are built to be strong and quiet, using current technology and materials. The axle manufacturer is Dana.

Key features

  • 4.88 gear ratio
  • Rear axle position
  • Dana 35 axle type with the M190 designation
  • Engineered for oversized tires and high performance engines
  • Made with current technology and materials

Gear ratio and daily use

A 4.88 ratio is a numerically higher gearing, which favors pulling power and quicker response from a stop over highway cruising speed. Drivers who run heavier tires often notice the change most in engine speed at highway pace. The trade-off is more engine revs on long drives, so gearing should match the way the vehicle is used.

Gears of this kind are usually installed with new bearings and a pinion seal, and the pinion depth and gear mesh need correct setup. The axle fluid should be checked after the break-in period, and the ring and pinion should be inspected for wear whenever the cover is removed. Keep the axle clean and free of metal debris during service.

  • Plan the setup around tire size and driving style
  • Replace bearings and seals during the gear change
  • Check fluid level after the break-in period
  • Inspect gear teeth for chips when the cover is off

Specifications

Brand G2 Axle and Gear
Part number 2-2149-488
Gear ratio 4.88
Axle location Rear
Axle type Dana 35 / M190
Popular axle manufacturer Dana

Vehicle fitment

It is matched by axle type, so use the Dana 35 / M190 rear axle type and the 4.88 ratio when choosing it, rather than the model year alone.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Professional setup is needed for gear mesh and pinion depth, and the new gears need a break-in period afterward.

What’s included

The ring and pinion set only.

Questions & Answers

What gear ratio is the G2 2-2149-488 set?

It is a 4.88 gear ratio ring and pinion set for the rear Dana 35 / M190 axle. Both axle types are covered by this set, so check the axle type before ordering.

Is this set for a Dana 35?

Yes. It is made for the Dana 35 / M190 rear axle, and the axle manufacturer is Dana. Before ordering, confirm your rear axle is a Dana 35 or M190 by checking the housing.

Does the set need professional installation?

Gear sets like this one need professional setup for gear mesh and pinion depth. A break-in period is also needed after the new gears are installed.

Does a 4.88 ratio change how the vehicle drives on the highway?

It can. A higher ratio raises engine speed at a given road speed, so highway driving may feel busier. Gearing choices depend on tire size, engine and how the vehicle is used, so think those through before ordering.

What should be checked before the gears are used hard?

Check the mesh and fluid level after the break-in period, and look for leaks around the seals and cover. Listen for unusual whine or clicking during the first drives, and have the setup rechecked if a noise persists.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon