Overview
The G2 Axle and Gear 3-2011-600 is a 6.00 ratio ring and pinion for the rear Ford 9 Inch axle. The pinion turns 6.00 times for each full turn of the ring gear, a numerically high ratio that multiplies torque at the wheels.
Built for oversized tires and high-performance engines, using current materials and manufacturing methods. This set is made for the rear Ford 9 Inch axle, so the housing on your vehicle is the reference point for fit.
Key features
- 6.00 gear ratio for the Ford 9 Inch rear axle
- Rear axle location
- Ring gear and pinion supplied as one set
- Designed for oversized tires and high-performance engines.
- Made with current technology and materials.
Gearing for oversized tires
Numerically high ring and pinion sets like this one multiply torque at the wheels, which helps when a vehicle carries larger tires or is driven hard off road. The same change means the engine turns faster at highway speed, so the setup suits drivers who value low-speed pull over relaxed cruising. Tire diameter and transmission gearing should be planned together with the ratio.
On a rear Ford 9 Inch housing, the carrier, bearings and pinion setup need to be checked before installation. Gear mesh and backlash are sensitive at high ratios, so a gear shop with setup tools is the usual installer. Inspect the carrier and axle bearings whenever the gears come out, since worn parts can affect the new set.
- Plan tire size and speedometer calibration together
- Check the carrier bearings and axle shafts
- Expect a break-in period as the teeth seat
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 3-2011-600 |
| UPC | 631410106534 |
| Axle type | Ford 9 Inches |
| Axle location | Rear |
| Gear ratio | 6.00 |
| Axle manufacturer | Ford |
Vehicle fitment
No specific vehicles are named. Check the housing and carrier on your vehicle against the rear Ford 9 Inch axle type before ordering, and have a gear shop verify axle sizing if unsure.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 6.00 ring and pinion needs precise backlash and tooth contact, so a gear shop with setup tools is the usual installer. Expect a break-in period as the teeth seat.
What’s included
One 6.00 ring and pinion set for the Ford 9 Inch rear axle, part number 3-2011-600.
Not included: Check carrier bearings, shims and installation hardware against your carrier before installation.









