Overview
The G2 2-2096-488 is a 4.88 ratio ring and pinion gear set for the GM 9.25 inch IFS front axle. It is engineered for oversized tires and high performance engines, and it uses current manufacturing materials for strength and quiet running.
The set is for the front axle location. Because a ring and pinion set changes how the differential gears mesh, it needs a professional who can set the gear mesh, followed by a break-in period before heavy use.
Key features
- 4.88 gear ratio
- Front axle location
- For the GM 9.25 inch IFS axle type
- Designed for oversized tires
- Designed for high performance engines
Front axle gear basics
A front ring and pinion does more work than most owners expect. The IFS front axle steers as well as drives, so gear wear often shows up as a vibration or a clunk when turning on and off throttle. A 4.88 ratio gives strong low-speed pull for larger tires, while the cost is higher engine speed at highway speed.
Gear sets wear together with the pinion bearings, the carrier bearings and the shims that control mesh. When the gears come out, inspect the bearing races and look at the old contact pattern on the teeth. Replacing worn parts at the same time avoids opening the axle twice.
- Match the axle size before buying
- Plan on new bearings if the carrier is opened
- Check fluid level after the break-in period
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2096-488 |
| UPC | 631410094831 |
| Axle manufacturer | GM |
| Axle location | Front |
| Axle type | GM 9.25 inch IFS |
| Gear ratio | 4.88 |
Vehicle fitment
No vehicle is named for this set. It is built for the GM 9.25 inch IFS front axle, so confirm your axle’s size and identification before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Ring and pinion gears need professional setup, including gear mesh and backlash, and a break-in period before heavy use.
What’s included
One ring and pinion gear set.
















