Overview
The G2 Axle and Gear 2-2138-513F is a 5.13 ratio ring and pinion for a Nissan front axle. The pinion turns 5.13 times for each full turn of the ring gear, a numerically high ratio that multiplies torque at the wheels and favors low-speed pulling.
The F suffix marks the front version of this 5.13 ratio. Model, years and axle size are needed to match this set to a vehicle, so confirm the front Nissan axle and its ring gear size before buying.
Key features
- 5.13 gear ratio
- Front axle location
- Built for a Nissan front axle application.
Front gear setup notes
Front ring and pinion sets sit in a steering-linked housing on many vehicles, so access and clearance shape the job. Gear mesh needs measured backlash and pinion depth, and the carrier often must be removed to set them. Plan time and tools accordingly before opening the housing.
Front gears wear in the same way as rear gears, with pitting and noise showing up first. A 5.13 ratio raises engine speed at highway speed, so check tire size and speedometer accuracy after the swap. Replace the carrier bearings and pinion seal at the same time while the housing is open.
- Match the F suffix to the front axle position
- Measure backlash with a dial indicator
- Inspect front axle seals for leaks
- Break in new gears before heavy towing
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2138-513F |
| UPC | 631410132717 |
| Application | Nissan |
| Axle location | Front |
| Gear ratio | 5.13 |
Vehicle fitment
This set is for a Nissan front 5.13 axle. Check the model, years and ring gear size on your vehicle before ordering, since those details decide the match.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front gear sets need careful pinion depth and backlash setup, so a gear shop is the practical installer. Plan a break-in run before heavy loads.
What’s included
One 5.13 front ring and pinion set, part number 2-2138-513F.
Not included: Carrier bearings and shims are not part of this set.









