Select your vehicle
-13%

G2 Ring and Pinion Set, Dana 44 / M210 Front 5.13 Ratio – 2-2151-513R

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Dana 44 and M210 front ring and pinion set, 5.13 ratio, part 2-2151-513R
  • Front axle, Dana 44 and M210 family
  • Built for oversized tires and high performance engines

Description

Overview

The G2 Ring and Pinion Set, Dana 44 / M210 Front 5.13 Ratio, part 2-2151-513R, is a front gear set at 5.13 for the Dana 44 front axle type.

The sets are built to hold up under oversized tires and high performance engines, and they use current materials.

Key features

  • 5.13 gear ratio
  • Front axle position
  • Built for oversized tires and high performance engines

Heavy use and gear choice

A 5.13 ratio is a steep gear for a front axle, and it changes how the drivetrain responds at low speed. It suits crawling and heavy loads better than highway cruising. Tire size, transmission and engine output should be considered together before the ratio is chosen.

Break-in and tooth contact checks matter more with a steep ratio. Keep the first drives gentle, watch for whine or heat from the carrier, and recheck the contact pattern once the gears have settled. Carrier bearings and the axle shafts should be looked at during the same job. Fresh gear oil at the right level helps the new set run cool and quiet from the start. A worn carrier bearing can cause play that mimics a gear problem, so inspect it first.

  • Plan for slower highway cruising
  • Check the carrier bearings before installing
  • Use fresh gear oil at the correct level

Specifications

Brand G2 Axle and Gear
Part number 2-2151-513R
Axle location Front
Axle type Dana 44
Gear ratio 5.13
Popular axle manufacture Dana

Vehicle fitment

Universal fit is listed, but no vehicle is named. Confirm the front Dana 44 or M210 application and the 5.13 ratio before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A 5.13 set needs its own break-in and a tooth contact check once the carrier is assembled.

What’s included

One ring and pinion set.

Questions & Answers

What ratio is the G2 2-2151-513R?

It is a 5.13 ratio front gear set for Dana 44 and M210 axles, built for high performance use with oversized tires. Confirm the axle and ratio against your vehicle before ordering.

Is this set for a front or rear axle?

Front, per the axle location listed in the specifications for the 2-2151-513R set from G2 Axle and Gear, so match it to a front Dana 44 or M210.

Does it cover the M210 front axle?

Yes. It is made for the Dana 44 and M210 front axles, at 5.13 ratio. Confirm your axle before ordering and set up the carrier for the front position only.

How can I tell if the gears need a setup check?

Listen for whine that changes with speed or load, look for oil leaks at the carrier, and watch for heat near the housing. Any of these signs means the pattern or preload should be checked. A quick inspection after the first drives can catch problems early.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon