Overview
The Revtek 736BK is a 4 inch rear block kit with U-bolts for the 2003 to 2009 Dodge Ram 3500. It is a direct fit for the rear position and covers the Laramie, SLT, ST, SXT, Sport and TRX4 trims.
Blocks add height to a vehicle without changing spring rates. The kit is for rear axles with a spring-over-axle design only, so check the axle design before fitting.
Before you install a block kit
A rear block kit raises the axle relative to the springs, so the axle sits higher under the truck. The springs themselves are not changed, and the lift comes from the block height. That makes blocks a straightforward way to gain clearance, but the new axle position affects several nearby parts that should be checked before the truck is driven.
Driveshaft angles are the first thing to review after this kind of lift. A higher axle can change the angle at the driveshaft, which can cause vibration at highway speed. Shock absorber length and brake line slack were set for the original axle position, so both should be inspected after installation.
- Retighten U-bolts after the first few drives
- Inspect brake lines for stretch at full suspension travel
- Verify driveshaft angles and watch for vibration at speed
- Recheck shock absorber length and mounting points
Specifications
| Brand | Revtek |
|---|---|
| Part number | REV736BK |
| Product type | Block kit with U-bolts |
| Lift height | 4 inches |
| Position | Rear |
| Axle design | Spring-over-axle only |
| U-bolts | Four, in various diameters and lengths |
| Fitment type | Direct fit |
| Vehicle | Dodge Ram 3500, 2003 to 2009 |
Vehicle fitment
It fits the 2003 to 2009 Dodge Ram 3500 in the Laramie, SLT, ST, SXT, Sport and TRX4 trims.
Other Ram models and model years are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is for spring-over-axle rear axles only. The blocks leave the spring rate unchanged, so the ride stiffness is not changed by the lift.
What’s included
The kit includes a block kit with four U-bolts and nuts. Check the block size and U-bolt length against your installation before starting.






