Overview
The Fabtech FTS1500UBK-3 is a U-bolt kit that clamps an axle to its springs. The kit contains four U-bolts, eight Nylock tall nuts and eight thick flat washers, with no lift blocks listed.
This kit is Direct Fit, but no year, make, model or chassis code is named for it. Verify fit for your own vehicle before ordering.
Key features
- Four U-bolts
- Eight Nylock tall nuts
- Eight thick flat washers
Setting up the clamp
U-bolts clamp the axle housing or tube to the leaf springs or a suspension block. Their job is to hold the axle in position while the vehicle moves, so they carry steady load and repeated shock. Thread engagement and clamp pressure are what keep the assembly tight over time.
Before installation, confirm the U-bolt diameter, thread length and axle tube width match your setup. Nut and washer condition matters too; rounded threads or cracked washers reduce clamp force. After the first few drives, retighten the nuts and check for movement between the axle and springs. Inspect U-bolts for stretching, bends or thread damage at regular service intervals.
- Use the nuts and washers supplied with the kit
- Check threads before reuse
- Torque to the value for your axle setup
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS1500UBK-3 |
| UPC | 674866002814 |
| U-bolts | Four |
| Nuts | Eight Nylock tall nuts |
| Washers | Eight thick flat washers |
Vehicle fitment
Fit is not confirmed for any vehicle. Confirm the year, model and trim against your own setup before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The listed contents are four U-bolts, eight Nylock tall nuts and eight thick flat washers. The listed contents do not include lift blocks.









