Select your vehicle

Revtek 2 Inch Rear Lift Block Kit – 730BK

Revtek

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Revtek 2-inch rear lift block kit, part number 730BK
  • Adds rear height for spring-over rear axles, spring rates not increased
  • No vehicles listed; check axle design before ordering
  • Confirm the kit contents before ordering.

Description

Overview

The Revtek 2-inch rear lift block kit, part number 730BK, raises a spring-over rear axle without changing the spring rates. Blocks of this type give rear height while the original springs stay in service.

The kit is meant only for rear axles with a spring-over design. No vehicles are named, so confirm your axle design before buying.

Key features

  • 2-inch rear height increase with spring rates left unchanged
  • Intended for spring-over rear axle designs only
  • Revtek part number 730BK with UPC 811323011297
  • U-bolt kits with four U-bolts and nuts are sold in various diameters and lengths

Choosing U-bolts and blocks

Block kits sit between the leaf springs and the axle, so the height gained is set by the block thickness. Measure the new height before choosing U-bolts, because the old U-bolts may be too short to wrap the axle at the higher position. Spring rates stay where they were, which keeps the ride close to the original feel, though the axle path will change.

Because the rear is raised, check the shock absorbers for full extension and compression. Driveline angles, brake lines and the parking brake cable may need inspection after installation. Look at the U-bolts and nuts during the first few drives and retighten as needed.

  • Measure U-bolt length against the new height
  • Inspect shock extension and compression
  • Check driveline angles after installation
  • Re-torque nuts after the first drives

Specifications

Brand Revtek
Part number 730BK
UPC 811323011297
Lift height 2 inches
Axle design Rear, spring-over
Spring rates Not increased by the blocks

Vehicle fitment

No vehicles are named for this kit, so fitment is not confirmed for any vehicle. It is intended only for rear axles with a spring-over design.

Front axles and other rear axle designs fall outside the intended use. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

Blocks sit between the springs and the axle, so measure the U-bolts needed for the new height before installing.

What’s included

Count the blocks, bolts and U-bolts against your installation plan before starting. Confirm whether U-bolts are part of your order.

SKU: REV730BK Category:

Specification

Shipping weight 20.00 lbs
Package dimensions 17.00 × 6.00 × 5.50 in
brands

Questions & Answers

What is Revtek part number 730BK?

Revtek 730BK is a 2-inch rear lift block kit for rear axles with a spring-over design. Blocks add height without increasing spring rates. Confirm your axle design before ordering.

Will 730BK fit my truck or Jeep?

No vehicles are named for it, so fit is not confirmed. The kit is for rear axles with a spring-over design only, so front axles and other rear layouts are not covered. Confirm your vehicle's year, model and trim before ordering.

Are U-bolts included with this kit?

Confirm the contents of the 730BK before ordering. U-bolt kits include four U-bolts and nuts and come in several diameters and lengths, so choose the size that matches the added height before installing.

How often should lift block bolts be checked?

Check the U-bolt nuts after the first few drives and then at regular service intervals. Look for thread stretch, rust and loose fasteners. Retorque them to the value your service manual gives for your vehicle.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon