Select your vehicle

Revtek 2 Inch Rear Lift Block Kit – 734BK

Revtek

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Revtek 2-inch rear lift block kit, part number 734BK
  • Adds height to spring-over rear axles without increasing spring rates
  • No vehicles listed; confirm axle design before ordering
  • Confirm whether U-bolts come with the kit before installing

Description

Overview

The Revtek 2-inch rear lift block kit, part number 734BK, adds 2 inches of rear height to a vehicle with a spring-over rear axle design. Revtek describes lift blocks as a simple way to add height without increasing spring rates, so the original spring rates stay as they are.

The kit is meant only for rear axles with a spring-over design. No specific vehicles are named, so confirm your axle design before buying.

Key features

  • Adds 2 inches of rear height without increasing spring rates
  • Intended for rear axles with a spring-over axle design only
  • Revtek part number 734BK with UPC 811323010764
  • U-bolt kits with four U-bolts and nuts come in various diameters and lengths

Choosing U-bolts for a block lift

A lift block sits between the spring and axle, so U-bolts must reach around the axle and through the spring pack at the new height. Longer U-bolts come in a range of diameters and lengths, and the right set depends on the spring and axle housing. Measure the spring pack and axle before ordering so the threads fully engage the nuts.

Blocks change the rear’s ride height but not its spring rate, so the suspension still works the same way under load. Check the shock absorbers for enough extension at the new height, and inspect brake lines and the rear driveshaft for added stress. Re-torque the U-bolt nuts after the first trips and look for shifting or rust around the blocks.

Specifications

Brand Revtek
Part number 734BK
UPC 811323010764
Lift height 2 inches
Axle design Rear, spring-over
Spring rates Not increased by the blocks

Vehicle fitment

The kit is for rear axles with a spring-over design only, and it does not extend to front axles.

Front axles and other rear axle designs are not covered. Confirm your year, model and trim before buying.

Installation notes

Lift blocks sit between the springs and the axle, so the U-bolts must suit the added height; check U-bolt length before installing.

What’s included

Check the package contents before installing to see whether U-bolts come with the kit.

SKU: REV734BK Category:

Specification

Shipping weight 30.00 lbs
Package dimensions 17.00 × 6.00 × 5.50 in
brands

Questions & Answers

What is the Revtek 734BK?

The Revtek 734BK is a 2-inch rear lift block kit for rear axles with a spring-over design. Blocks add height without increasing spring rates. Confirm your axle design before ordering.

Will the 734BK fit my vehicle?

Only if your vehicle has a spring-over rear axle. The kit is for that design only, so front axles and other rear layouts are not covered. Confirm your year, model and trim before buying.

Does the kit come with U-bolts?

U-bolt kits come with four U-bolts and nuts in various diameters and lengths, so choose the set that matches the 2-inch added height. Check the package contents before installing.

How do I know if my axle is spring-over?

On a spring-over axle, the leaf spring sits on top of the axle housing rather than below it. Look under the rear of the vehicle and compare the spring position to the axle. If you are unsure, have a shop look at the rear before buying a block kit.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon