Overview
The Revtek 3.5-inch rear lift block kit, part number CB35BK, is a set of rear lift blocks that raises a spring-over rear axle by 3.5 inches. Blocks lift the vehicle without changing spring rates, which keeps the springs at their original rating.
The kit is for rear axles with a spring-over design only. Match your axle design to the kit before ordering, since no vehicle makes or models are given.
Key features
- 3.5-inch rear lift without a change in spring rates
- Designed for spring-over rear axle designs
- Part number CB35BK with UPC 811323010825
- Matching U-bolt kits, each with four U-bolts and nuts, are available in several diameters and lengths
Choosing U-bolts for a block lift
Spring-over rear axles sit with the leaf springs mounted above the axle tube, so block lifts go between the springs and the axle and shift the axle down relative to the frame. That change loads the U-bolts differently than stock, since they now hold the axle in a new position. Choosing U-bolts that wrap the axle and match the added height is the step most installers check first, before anything is lifted onto stands.
After the blocks are in, pinion angle and shock length both change. Recheck driveline angles and confirm the shocks still have full travel in both directions. Brake lines and the parking brake cable may need a look as well, since the axle sits in a new position. Retighten U-bolt nuts after the first few drives and again after the first longer trip.
- Measure the added height before ordering U-bolts
- Check brake line length and routing
- Inspect U-bolts for stretching or thread damage
- Retorque nuts after the first few drives
Specifications
| Brand | Revtek |
|---|---|
| Part number | CB35BK |
| UPC | 811323010825 |
| Lift height | 3.5 inches |
| Axle design | Rear, spring-over |
| Spring rates | Not increased by the blocks |
Vehicle fitment
No vehicle makes or models are confirmed for this kit. It is intended only for rear axles with a spring-over design, not front axles.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Blocks are placed between the springs and the axle, so U-bolt length must match the 3.5-inch added height.
What’s included
Check the package contents against your installation before starting. U-bolt kits come in several diameters and lengths, so choose one that matches the added height.








