Overview
The ReadyLift 69-3010 is a 1.0-to-1.5-inch SST lift kit for 2007 to 2020 GM SUVs and 1500 trucks, designed for 2WD and 4WD models. It raises the front 1.5 inches and the rear 1.0 inch for a mild stance with a slight rake in the rear for hauling or towing. Tires up to 33 inches are allowed.
The front lift comes from the adjustable front strut extension, part 66-3090, which can be set anywhere from 1.0 to 1.5 inches of front lift. The rear 1.0-inch lift is a CNC-machined 6061-T6 billet aluminum rear coil spring spacer. Together the two parts keep the ride quality and factory geometry intact.
Key features
- Adjustable front strut extension for 1.0 to 1.5 inches of front lift
- 1.0-inch rear lift from a billet aluminum coil spring spacer
- Complete front and rear suspension system
- 2WD and 4WD applications
- Tires up to 33 inches
- Hardware and written installation instructions included.
Setting the front height
The front strut extension is adjustable, so the front height can be set anywhere within the range of the kit. Setting the height evenly on both sides matters more than hitting a specific figure, because uneven lift changes caster and camber and can pull the truck to one side. Measure the front height at each corner before final tightening.
The rear spacer controls rake and the way the truck carries load. A billet spacer keeps the rear cleanly seated, but the rear springs still need a check after the first few drives. A slight rake may suit hauling, while a level stance may suit daily driving. Owners who tow often should recheck hitch and brake line geometry once the lift is in.
- Torque all strut and spacer fasteners after the first drive
- Set the front lift evenly from side to side
- Check brake hose length after the lift
- Recheck the alignment after the final height is set
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-3010 |
| Front lift | 1.0 to 1.5 inches, adjustable |
| Rear lift | 1.0 inch |
| Rear spacer material | CNC-machined 6061-T6 billet aluminum |
| Tire clearance | Up to 33 inches |
| Drive type | 2WD and 4WD |
| Shocks | None included |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2007 to 2020 Cadillac Escalade (Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium and Premium Luxury), Escalade ESV (2007 to 2020) and Escalade EXT (2007 to 2013), Chevrolet Avalanche (2007 to 2013), Tahoe (2007 to 2020), GMC Yukon (2007 to 2020), Yukon XL (2015 to 2020) and Yukon XL 1500 (2007 to 2014). Suburban covers 2007 to 2014 as the 1500 model and 2015 to 2020 as the Suburban.
Model years 2021 and later are not covered, and pre-2007 Suburban models are not covered either. Check your vehicle’s details against the model years listed here before ordering.
Installation notes
The adjustable strut extension and the rear spacer change suspension height, so an alignment should be checked after installation. ReadyLift says each kit includes written instructions covering the installation steps.
What’s included
The kit includes the adjustable front strut extensions, the billet aluminum rear coil spring spacer, the hardware and the written instructions.
Not included: Shocks are not included with this kit.









