Overview
The ReadyLift 69-2302 is a 3.5-inch front and 2-inch rear SST lift kit for the 2009 to 2013 Ford F-150. It is a packaged front and rear lift that gives a common stance and is set high enough for 35×11.50 tires without being too high. It fits FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL and XLT versions.
The kit is built around DOM tubular steel upper control arms with a 14-degree ball joint cup, which keeps the geometry and alignment correct. Each arm includes a proprietary heavy-duty ball joint, the same type used in 3/4-ton truck kits. TCT free floating pivot bushings are included and are self-lubricating to reduce friction.
Key features
- 3.5 inches of front lift and 2 inches of rear lift
- DOM tubular steel upper control arms
- 14-degree ball joint cup for proper geometry.
- Proprietary ReadyLift heavy-duty ball joints
- TCT free floating, self-lubricating pivot bushings
- Clearance for 35×11.50 tires
Upper arms and ball joint care
Upper control arms carry front axle loads at the top of the knuckle, and ball joints take steering and suspension movement at each end. When a lift raises the front, these joints work at new angles, so a set of new arms should be paired with a check of the lower joints and the steering linkage.
Pivot bushings wear through time and road grit. Self-lubricating designs reduce the need for greasing, but they still need a look during service. Look for cracks, separation from the metal sleeve, and clunks when turning or going over bumps. A worn bushing lets the arm move out of position, which upsets the alignment and tire wear.
- Check ball joint boots for tears and grease leakage
- Listen for clunks over bumps and at low speed turns
- Keep a written alignment record after the install
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-2302 |
| Front lift | 3.5 inches |
| Rear lift | 2 inches |
| Upper control arms | DOM tubular steel, 14-degree ball joint cup |
| Pivot bushings | TCT free floating, self-lubricating |
| Tire size | 35×11.50 |
| Lift kit size | 3 to 4 inches |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for 2009 to 2013 Ford F-150 models in the FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL and XLT versions.
2014 and later F-150 models are not covered, and 2008 and earlier are not included. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Replacing the upper control arms changes front geometry, so a wheel alignment belongs after the install. The rear lift of 2 inches changes driveline angles, so those should be checked as well.
What’s included
The kit includes the DOM tubular steel upper control arms with their ball joints, the TCT pivot bushings, the front lift components and the rear lift components.









