Overview
The ReadyLift 44-2576 is a 7-inch front and 5.0-inch rear lift kit with Bilstein rear shocks for Ford F-150 4WD trucks. It covers 2015 to 2020 trucks in the King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL and XLT versions. The kit is designed to give lift while keeping the factory ride and steering geometry.
The front uses precision laser cut and CNC formed sub frame assemblies, heavy duty cast nodular iron steering knuckles, and an integrated differential drop bracket for correct CV axle angles. The 7-inch front lift comes from offset steel strut extensions that ReadyLift describes as patent pending. The rear uses 5-inch tall OEM-style blocks, which ReadyLift says give 4.0 inches of total rear lift once installed. A steering extension and a rack correction system are included to keep steering working as the factory design intends.
Key features
- 7.0 inches of front lift
- 5.0-inch OEM-style rear blocks
- Laser cut and CNC formed sub frame assemblies
- Cast nodular iron steering knuckles
- Integrated differential drop bracket
- Offset steel strut extensions
- Steering extension and rack correction system
- Rear Bilstein 5100 Series shocks
Before you buy
A sub frame lift with offset strut extensions changes the front geometry, so the wheels, tie rods and steering shaft all need a fresh look after installation. The steering extension and rack correction system are there to keep steering working as intended, but tie rod ends and the steering stabilizer should still be inspected for play before the first drive. Good steering feel depends on a clean alignment.
If the frame attachment section requires welding, plan that step before the kit goes on the truck. Welding near fuel and brake lines needs care, and the work is best done by someone experienced with frame welding. Check the differential drop bracket bolts, the CV axle angles and the rear blocks after the first few drives, since new angles can settle under load.
- Inspect tie rod ends and steering play after the first drive
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY44-2576 |
| Front lift | 7.0 inches |
| Rear lift | 4.0 inches total, with 5-inch blocks |
| Lift height range | 6 to 7 inches |
| Rear shocks | Bilstein 5100 Series |
| Front shocks | Factory, reused |
| Steering knuckles | Cast nodular iron |
| Drive type | 4WD |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2015 to 2020 Ford F-150 models in the King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL and XLT versions.
One subframe section attaches to the frame and requires welding, so plan for that step. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
One subframe section requires welding to the frame. The steering extension and rack correction system change steering geometry, so an alignment should be checked after installation. The differential drop bracket sets the CV axle angles, which should be checked on the truck.
What’s included
The kit includes the sub frame assemblies, the cast nodular iron knuckles, the integrated differential drop bracket, the offset steel strut extensions, the steering extension, the rack correction system, the 5-inch OEM-style rear blocks and the rear Bilstein shocks.










