Overview
The ReadyLift 66-3085 is a 2.25-inch front leveling kit for GM 1500 pickups and full-size SUVs, including the Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon and Escalade. It lifts the front through strut extensions and lower strut mount spacers, so the front sits level with the rear.
This kit is designed for the newer body style 6-lug trucks. It installs without permanent modification of factory parts, does not compress the factory springs and does not require cutting the strut studs. Because it works on top of the strut, the factory ride quality is kept rather than the spring rate being changed.
Key features
- Two aluminum SST strut extensions and two aluminum lower strut mount spacers
- CNC-machined 6061-T6 solid billet aluminum, in place of stamped steel
- 2.25 inch front lift without cutting the strut studs
- Factory springs are not compressed
- All necessary hardware is included
Choosing the right setup
Strut-top spacers raise the front without changing the spring, so the stock coil spring and shock keep their original design. Owners often compare this with coil spring lift or torsion key kits, which change spring preload or height in a different way. Matching the kit to the existing ride goal is the simplest way to choose.
Before installation, check that the upper strut mount, brake hoses and ABS lines have room at the new height. Replace worn ball joints and tie rod ends while the front is apart, since a raised front puts more angle on those parts. Once installed, have the alignment set to the new height and recheck the bolts after the first few trips.
- Check brake hose length after the lift
- Inspect ball joints and tie rod ends before installing
- Confirm wheel and tire clearance at full steering
- Recheck mounting hardware after the first trips
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-3085 |
| Front lift height | 2.25 inch |
| Lift method | Strut spacers (aluminum SST strut extensions with lower strut mount spacers) |
| Material | 6061-T6 solid billet aluminum |
| Rear lift | None, front lift only |
| Finish | Unfinished |
| Track bar drop | Not included |
| Shock relocation bracket | Not applicable |
| Bump stops | None |
Vehicle fitment
It fits the 2007–2019 Cadillac Escalade and Escalade ESV, the 2007–2013 Chevrolet Avalanche, the 2007–2019 Chevrolet Silverado 1500 and Tahoe, the 2015–2019 and 2007–2014 Chevrolet Suburban (the latter as the Suburban 1500), the 2007–2019 GMC Sierra 1500 and Yukon, the 2015–2019 GMC Yukon XL and the 2007–2014 GMC Yukon XL 1500.
Pre-2007 GM pickups and SUVs are not on the list, and neither are 2020 and later models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 2017 model year trucks with stamped steel upper control arms need either aftermarket upper control arms or the aluminum factory upper control arms, because stamped steel arms can develop ball joint problems when the suspension is leveled or lifted. Install the kit without the lower horseshoe spacer to keep the correct height and geometry. Measure the wheel hub to fender distance first. A reading above 22 inch means the truck already has front lift and the kit must be modified or replaced.
What’s included
Two aluminum SST strut extensions, two aluminum lower strut mount spacers and the hardware needed for installation.









