Overview
The ReadyLift 69-9920 is a 2-inch front and 1.5-inch rear SST lift kit for the 2019 and 2020 Subaru Forester in the Base, Limited, Premium, Sport and Touring versions. It raises the Forester for a taller stance, more ground clearance and room for larger tires. It accommodates up to 225/65-17 on 17×8 wheels with +38 mm offset.
The lift uses the same technology developed for the CrossTrek and Outback. Offset fabricated heavy duty steel plate top mount strut extensions keep factory alignment geometry. Installation is bolt-on, with no cradle drop and no permanent modifications. The kit is made in the USA.
Key features
- 2 inches of front lift and 1.5 inches of rear lift
- Offset fabricated steel top mount strut extensions
- Keeps factory alignment geometry.
- Bolt-on installation with no cradle drop
- Increased ground clearance with a P225 tire.
- Fits 225/65-17 on 17×8 wheels with +38 mm offset
- Made in the USA
Before you buy
Any strut-based lift changes how the front suspension sits, so it is worth thinking about the whole setup before ordering. A taller front stance shifts the angles of the driveshafts, the brake lines and the steering components, and the lift works best when the rest of the front end is in good condition. Before installing, look over the strut mounts, bushings and tie rod ends, since older parts can feel loose once the geometry changes.
Larger tires add rotating weight and can change speedometer readings and steering effort, so tire choice matters as much as lift height. Tire brand and tread design affect how close the tire sits to the fender liner and frame. Rotate and balance new tires early, and recheck clearance after the first few drives on uneven ground.
- Inspect strut mounts and tie rod ends before installing
- Recheck fastener torque after the first few drives
- Plan an alignment as soon as the install is complete
- Keep a record of the tire size and brand used with the lift
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-9920 |
| Front lift | 2 inches |
| Rear lift | 1.5 inches |
| Maximum tire size | 225/65-17 on 17×8 wheels, +38 mm offset |
| Origin | Made in the USA |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2019 and 2020 Subaru Forester models in the Base, Limited, Premium, Sport and Touring versions.
Other Forester model years are not covered. Tire fit may need minor trimming depending on tire brand and tread design. Check that your vehicle’s year, model and trim are covered before ordering.
Installation notes
The kit is bolt-on with no permanent modifications, and the strut extensions are the main lift component at the front. Check the alignment after installation and allow for minor trimming if a different tire brand is fitted.
What’s included
The kit includes the offset top mount strut extensions and the 2-inch front and 1.5-inch rear lift. Check the package contents against your installation before starting. The lift uses the same technology developed for the CrossTrek and Outback.












