Select your vehicle

ReadyLift 6 Inch Lift Kit with Bilstein Shocks – 49-1960

ReadyLift

Shop Ram 2500 Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 6-inch front and 3.5-inch rear lift for 2019 Ram 2500 4WD diesel trucks
  • Performance front coil springs and heavy-duty rear spacers that work with the factory rear springs
  • Four Bilstein shocks included
  • Tires up to 37×13.50 on 17-to-20-inch wheels up to 9.5 inches wide

Description

Overview

The ReadyLift 49-1960 is a 6-inch front lift kit with Bilstein shocks for the 2019 Dodge Ram 2500 4WD diesel short bed. It is made in the USA and gives 6 inches of front lift with performance front coil springs. The fit range covers 2019 models in the Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star and Tradesman versions.

At the rear, ReadyLift uses its spacer design with heavy-duty 3.5-inch rear spacers that work with the factory rear coil springs. Frame-mount radius arm drop brackets return the factory radius arms to their factory position, so the alignment geometry can be retained. The kit also includes new 2019-specific heavy-duty fabricated steel front and rear track bar brackets, a dropped cast iron front pitman arm, front sway bar relocation brackets and front and rear bump stop extensions. Four Bilstein shocks are included, and the kit is said to allow tires up to 37×13.50 on 17-to-20-inch wheels up to 9.5 inches wide.

Key features

  • 6 inches of front lift from performance front coil springs
  • 3.5-inch heavy-duty rear spacers that work with the factory rear coil springs
  • Frame-mount radius arm drop brackets
  • 2019-specific steel front and rear track bar brackets
  • Dropped cast iron front pitman arm
  • Front sway bar relocation brackets
  • Front and rear bump stop extensions
  • Four Bilstein shocks

Tire and wheel fit

Tire width, height and wheel offset decide how a front lift performs on and off road. Wider or taller tires add rotational weight and change gearing, while offset controls how far the tires sit from the fender. Taller tires also increase the load on steering and brakes, so those parts deserve a check once the truck is lifted.

A front lift raises the steering and suspension geometry, so the pitman arm, sway bar brackets and track bar need clearance at full turn. Replacing worn ball joints, tie rod ends and bushings before the lift keeps the new height stable. Ride quality is shaped by the coil springs and shock settings together, so the two should be considered as a pair.

  • Check pitman arm clearance at full steering lock
  • Inspect sway bar brackets after the first drives
  • Look for tire rub at full compression
  • Recheck wheel bearings after the first long trip

Specifications

Brand ReadyLift
Part number RDY49-1960
Front lift 6 inches
Rear spacer 3.5 inches, heavy-duty
Shocks Four Bilstein
Tire size Up to 37×13.50 on 17-to-20-inch wheels up to 9.5 inches wide
Origin Made in the USA
Drive type The kit is for 4WD diesel short bed trucks. Gas-engine trucks are not covered.
Fitment type Direct fit

Vehicle fitment

It fits 2019 Ram 2500 models in the Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star and Tradesman versions.

Coverage runs to 2020 diesel short bed trucks, while the fit range shows 2019 only. Gas-engine trucks are not covered. Confirm your vehicle’s year, engine, bed length and trim before ordering.

Installation notes

The radius arm drop brackets return the factory radius arms to their factory position, which ReadyLift says is needed for the alignment geometry. A wheel alignment belongs after installation, and the front pitman arm and sway bar relocation brackets need to be checked for clearance.

What’s included

The kit includes the performance front coil springs, the heavy-duty rear spacers, the radius arm drop brackets, the 2019-specific track bar brackets, the dropped pitman arm, the sway bar relocation brackets, the bump stop extensions and four Bilstein shocks.

SKU: RDY49-1960 Categories: ,

Fitment

VehicleYearsTrims
Ram 25002019Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 49-1960 fit a 2020 Ram 2500?

Possibly. Coverage includes 2019 and 2020 diesel trucks, but the fit range shows 2019 only. Confirm fit for your vehicle's year, model and trim before ordering.

Are shocks included?

Yes. The kit includes four Bilstein shocks, which are part of the kit and are not sold separately with this part.

What is the largest tire this kit allows?

Tires up to 37x13.50 fit on wheels from 17 to 20 inches in diameter and up to 9.5 inches wide. Check clearance once the lift is installed.

Do I need an alignment and a steering check after a front lift?

Yes. A front lift changes steering and suspension angles, so an alignment should follow installation. Check the pitman arm, sway bar relocation brackets and steering components for clearance at full turn and full travel.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ram 2500 Lift Kits on Amazon