Select your vehicle

ReadyLift 6″ Big Lift Kit – 44-39610

ReadyLift

Shop Chevrolet Silverado 1500 Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 6-inch lift with angled top mount strut extensions for 2019–2021 Silverado 1500 High Country and Sierra 1500 Denali
  • 1/4-inch boxed steel differential drop brackets and 3/16-inch full-width skid plate
  • 5-inch fabricated steel rear blocks with integrated bump stop landings
  • Factory ARC rear shocks kept in use with new shock extensions

Description

Overview

The ReadyLift 44-39610 is a 6-inch lift kit for 2019 to 2021 Chevrolet Silverado 1500 High Country and GMC Sierra 1500 Denali trucks. It is built for the newer GM 1500 body style, with 35-inch tires and a block and spacer rear lift.

The kit has boxed steel front and rear cross members and a full-width front skid plate of 3/16-inch plate steel. The differential drop brackets are 1/4-inch boxed plate steel with a double gusset and a boxed center rib. The 6-inch front lift uses angled and offset top mount strut extensions, which ReadyLift says realign the struts to improve shock performance and reduce wear. A lower mount strut pre-load spacer gives a slight increase in spring rate for the larger tires. At the rear, 5-inch tall fabricated steel blocks with integrated bump stop landings are fitted, and new rear shock extensions keep the factory ARC rear shocks in use.

Key features

  • 6-inch lift on the 2019 to 2021 GM 1500 4WD
  • Boxed steel front and rear cross members
  • Full-width front skid plate of 3/16-inch plate steel
  • 1/4-inch boxed plate steel differential drop brackets with double gussets
  • Angled and offset top mount strut extensions
  • Lower mount strut pre-load spacer for a slight spring rate increase
  • 5-inch fabricated steel rear blocks with integrated bump stop landings
  • Rear shock extensions for the factory ARC rear shocks

Trimming and wheel fit

Trimming is the most common step when a larger wheel and tire package goes on a truck. The front valance, liner edges and mud flaps can contact the tire at full steering lock or full compression, so measure clearance before finishing the install. Trimming a little material from the liner edges is often easier than relocating a part later.

Wheel offset decides how far the tire sits from the fender and how it meets the strut. Negative offset wheels push the tire outward, which is why clearance checks matter most at the front. The strut extensions and pre-load spacer change spring behavior, so the front end should be checked after the first few trips.

  • Check tire clearance at full steering lock
  • Trim liners and mud flaps only where contact occurs
  • Recheck front end bolts after the first few drives
  • Confirm brake line routing with the new tire size

Specifications

Brand ReadyLift
Part number RDY44-39610
Lift kit size 6 inches
Front components Angled and offset top mount strut extensions, lower mount pre-load spacer
Rear blocks 5 inches, fabricated steel
Skid plate 3/16-inch plate steel, full width
Differential drop brackets 1/4-inch boxed plate steel
Tire fit 35×12.50 with no trimming on 20×9 0 offset; 35×12.50 or 325/60R20 with trimming on 20×10 -18 offset
Fitment type Direct fit

Vehicle fitment

It fits 2019 to 2021 Chevrolet Silverado 1500 High Country models and GMC Sierra 1500 Denali models.

Silverado and Sierra 1500 versions other than High Country and Denali are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Larger wheel and tire packages require trimming of the front valance, the front and rear felt liner edges and the front-to-rear well edge mud flap. The lift changes front geometry, so a wheel alignment belongs after the install.

What’s included

The kit includes the boxed steel cross members, the full-width skid plate, the differential drop brackets, the top mount strut extensions, the lower mount pre-load spacer, the 5-inch rear blocks and the rear shock extensions.

SKU: RDY44-39610 Categories: ,

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002019–2021High Country
GMC Sierra 15002019–2021Denali

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What tire size works without trimming?

35x12.50 tires fit with no trimming on 20x9 wheels with 0 offset. Larger combinations, such as 20x10 wheels at -18 offset with 35x12.50 or 325/60R20 tires, need trimming.

Does this kit fit a Silverado 1500 LT?

No. The fit covers the Silverado 1500 High Country only, so other Silverado 1500 versions such as the LT are not included. Confirm the version before ordering.

Are the factory rear shocks kept?

Yes. New rear shock extensions allow the factory ARC rear shocks to stay in use. The kit includes those extensions along with the rear blocks.

Should the front skid plate be checked after installing bigger tires?

Yes. A full-width skid plate and boxed cross members change the clearance under the front end, so check steering travel, brake lines and the plate mounting after the install.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Chevrolet Silverado 1500 Lift Kits on Amazon