Overview
The Pro Comp 69400 is a replacement Uniball cup and dust cap for the Pro Comp upper A-arm, cap part COMH-24T. It is sold as a replacement cup and dust cap for that arm design.
It fits a wide range of 2004 to 2014 full-size trucks and SUVs, including Cadillac Escalade, Chevrolet Silverado 1500, Tahoe and Suburban, GMC Sierra 1500 and Yukon, Chevrolet Avalanche, Toyota Tundra and Ford F-150 models.
Pro Comp’s upper arm copy describes stainless steel FK Uniball joints and a billet machined dust cap that keeps dirt out of the Uniball. This part supplies the replacement cup and dust cap for that design.
Key features
- Replacement Uniball cup for the upper A-arm
- Replacement dust cap, cap part COMH-24T
- Fits the Pro Comp upper arm design
- Stainless steel FK Uniball system, as used on the Pro Comp arm
Before you buy
Upper control arm joints carry steering and suspension loads at the top of the front end, and the cup and dust cap keep grit and water away from the ball. Worn joints usually announce themselves with a clunk over bumps, wandering steering, or uneven tire wear on the front edges. A torn or cracked dust cap is an early warning, because once dirt reaches the ball the wear speeds up quickly.
When a cup is replaced, the old cup has to be pressed or driven out, and many shops pull the arm for the job. Lower ball joints, bushings and tie rod ends are often inspected at the same time, since worn steering parts change alignment. After any arm work, a fresh alignment and a torque check after the first few drives help the new parts settle.
- Inspect the dust cap for cracks before each off-road trip
- Check for play with the wheels off the ground
- Keep the grease fitting and boot clean during routine service
- Replace joints on both sides when one is worn
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 69400 |
| UPC | 614901141634 |
| Cap part | COMH-24T |
| Part type | Uniball A-arm repair: cup and dust cap |
Vehicle fitment
It fits 2007 to 2014 Cadillac Escalade, Escalade ESV and Escalade EXT models, 2007 to 2013 Chevrolet Avalanche, 2007 to 2014 Chevrolet Silverado 1500 and Suburban 1500, 2007 to 2014 Chevrolet Tahoe, 2007 to 2014 GMC Sierra 1500 and Yukon, 2007 to 2014 Toyota Tundra, 2004 to 2013 Ford F-150, and the 2007 Silverado 1500 Classic and Sierra 1500 Classic.
Confirm fit for heavy-duty 2500 and 3500 trucks, and for your vehicle’s year, model and trim, before ordering.
Installation notes
Upper control arm parts affect steering geometry, so have the front end aligned after any arm work is finished.
What’s included
One Uniball cup and dust cap, cap part COMH-24T. The arm itself is not included.








