Overview
The Crown Automotive 52087786 is a front lower control arm for the 1993–1998 Jeep Grand Cherokee (ZJ). The arm is set in the front lower position, so confirm the position against the arm you are replacing before fitting.
The arm comes with bushings and is set in the front lower position for the ZJ trims below.
Key features
- Includes bushings
- Front lower position
- Grand Cherokee ZJ, 1993–1998
- Part number 52087786 and UPC 848399015621
Choosing a front arm
A front lower control arm links the wheel side of the suspension to the frame and works with the upper arm to locate the wheel. It carries braking and cornering loads, so its bushings and mounting points matter for steering precision and tire wear. A bent arm or a worn bushing often shows up as a pull, a vibration or uneven tread on the front tires.
Front lower arms are often replaced with the ball joint and bushings checked at the same time. Inspect the old arm for cracks at the welds and for bent metal, and compare the mounting holes to the new arm before fitting. Use a torque wrench for final tightening. After installation, have the front alignment checked so the caster and toe settings are right.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52087786 |
| UPC | 848399015621 |
| Position | Front lower |
| Included | Bushings |
| Application | 1993–1998 Jeep Grand Cherokee (ZJ) |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1993–1998 Jeep Grand Cherokee ZJ models, including 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims.
Other Grand Cherokee and Wrangler generations are not in the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Bushings are included. Check ball joints, bolts and other hardware against your installation before starting.









