Overview
The Tuff Country 20935 is a pair of upper control arms for the 2009–2018 Ford F-150 that use uni-ball joints. The uni-ball design reduces binding that standard ball joints can cause on lifted trucks and adds suspension travel.
The arms are designed as an addition to an existing 2 inch to 4 inch suspension lift kit, and the vehicle must have factory steering knuckles. Tuff Country also offers the arms as an option in complete lift kits for some Tacoma, Tundra, F150, Silverado 1500 and Ram 1500 models.
Key features
- Uni-ball joints reduce binding caused by standard ball joints
- Adds suspension travel on lifted trucks
- Built for use with a 2 inch to 4 inch suspension lift
- Sold as a pair
- Factory rims will not fit; a rim with 5.5 inch or less back spacing is required
Steering knuckles and wheel spacing
Uni-ball joints replace a standard ball joint with a ball and cup design that tolerates more angle, which helps when a lifted truck moves the arm into steep positions. Less binding means the suspension can cycle more freely, and the joint has less stress at full travel. Uni-balls wear differently from standard joints, so they need inspection for looseness, boot damage, and rough movement during routine service.
Confirm the truck has factory steering knuckles and a 2 inch to 4 inch suspension lift before installing. Check wheel back spacing early so the rim clears the arm and brake components. After the arms and lift are in place, a professional alignment keeps tire wear even and steering centered. Keep the joints clean and check for play after the first few drives.
- Verify factory steering knuckles
- Confirm 5.5 inch or less back spacing
- Schedule alignment after lift install
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 20935 |
| UPC | 698815209352 |
| Position | Front |
| Quantity | Pair |
| Wheel requirement | 5.5 inch or less back spacing |
| Suspension requirement | 2 inch to 4 inch lift with factory steering knuckles |
Vehicle fitment
Tuff Country lists these arms for the 2009–2018 Ford F-150 in the FX4, King Ranch, Lariat, Lariat Limited, Limited, Platinum, SSV, STX, XL and XLT trims.
The arms fit the 2009–2018 Ford F-150 in FX4, King Ranch, Lariat, Lariat Limited, Limited, Platinum, SSV, STX, XL and XLT trims. Other F-150 generations and Tacoma, Tundra, Silverado and Ram trucks fall outside this fit range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory rims will not fit these arms, so confirm the wheel back spacing before installing. Check the steering knuckles first, then have a professional alignment done after the lift is in place.
What’s included
A pair of upper control arms. Check the hardware and wheels against your installation before starting.







