Overview
The Rancho RS62131 is a heavy-duty adjustable rear track bar for 2018–2026 Jeep Wrangler JL models with a 2 to 4.5-inch lift. It is built with 1.375-inch OD tubing and forged ends, and it is designed to center the rear axle in its position once the lift is installed.
The track bar uses D2 bushings, which are synthetic and high-articulation. The bushings are intended to reduce noise, vibration and harshness. The bar is built with DOM tubing and forged ends.
Key features
- Heavy-duty track bar with .290 DOM wall tubing
- Forged ends
- 1.375-inch outside diameter bar
- D2 bushings included
- Rear position
Rear track bar setup
A rear track bar keeps the rear axle centered side to side, which helps the vehicle track straight under power and braking. On a lifted JL, the rear axle can shift once the suspension is raised, so an adjustable bar gives a way to re-center it after the install. Bar length and mounting angle both affect how evenly the axle sits.
Plan to inspect the rear ends and bushings after the first few drives, since new hardware can settle. Look for cracks in the bushing rubber, play at the frame or axle bracket, and any binding through full travel. Torque all fasteners as specified before driving on the road again.
- Check the bar moves freely through full travel
- Look for play at the frame and axle brackets
- Confirm the axle is centered after installation
- Re-check fasteners after the first drives
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS62131 |
| Position | Rear |
| Lift height | 2.5 to 4.5 inches (specifications); 2 to 4.5 inches (summary) |
| Tubing | .290 DOM wall |
| Bar diameter | 1.375 inches OD |
| Bushings | D2 |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler JL in Rubicon, Sport, Sport S, Unlimited Moab, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims.
Wrangler JK and TJ models, the Gladiator, and the JL before 2018 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a rear track bar, so install it at the rear axle. Confirm the position against your vehicle’s layout before ordering.







