Overview
The Rubicon Express R/ERE1674 is an adjustable front track bar for the 2018 to 2026 Jeep Wrangler JL and the 2020 to 2026 Jeep Gladiator JT. It replaces the stock front track bar on vehicles with 0 to 3.5 inches of lift.
The adjustable length re-centers the front axle after a lift is installed and gives maximum clearance between the steering components. Installation is bolt-in, using the factory mounts.
Key features
- Replaces the stock front track bar
- Designed for 0 to 3.5 inches of lift
- Adjustable to re-center the front axle
- Bolt-in installation using factory mounts
- Clearance between steering components
Choosing a lift setup
A front track bar links the axle to the frame and keeps it centered as the suspension moves. A lift changes the geometry of that link, so the bar and the axle position need to be set together once the new height is in place. Without that check, the axle can sit off center and the steering can feel loose or pull.
When choosing a setup, match the track bar to the lift height and the tires you run. Larger tires add load, so inspect the bar ends and mounting hardware after the first few drives. Steering components that are already worn are often replaced at the same time, including tie rod ends and the steering stabilizer.
- Confirm the lift height before ordering
- Check bar ends for play after the first drives
- Re-check the alignment after any height change
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/ERE1674 |
| Position | Front |
| Lift range | 0 to 3.5 in |
| Adjustment | Adjustable length |
| Installation | Bolt-in with factory mounts |
Vehicle fitment
It fits the 2018 to 2026 Jeep Wrangler JL, in two-door and four-door models including the Unlimited, and the 2020 to 2026 Jeep Gladiator JT.
Fit is for the Wrangler JL and Gladiator JT. Confirm fit for your vehicle’s year, model and trim before ordering, especially for a Wrangler JK or an older TJ or LJ.
What’s included
The adjustable front track bar under part number R/ERE1674.












