Overview
The Rancho RS62109 is an adjustable front track bar for the Jeep Cherokee (XJ) and Wrangler (TJ). It works with suspension lifts from 2 to 5 in. and lets you center the front axle, which keeps the wheel centered in the wheel well.
Rancho’s D2 bushings are the main design feature. The synthetic, high articulation bushings use a firmer inner bearing material and a softer outer material, which Rancho says dampens noise, vibration and harshness (NVH). The bushings are grease free, with a PTFE liner impregnated into the internal bushing that acts as a lubricant for quiet, maintenance free operation.
Key features
- Adjustable length for suspension systems with 2 to 5 in. of lift
- Centers the front axle for proper alignment and wheel position in the wheel well
- Forged ends with high-articulation D2 bushings
- Firmer inner and softer outer bushing materials to dampen noise, vibration and harshness
- Grease free bushings with an internal PTFE liner
- It is designed to improve ride quality.
Track bar wear and alignment
A track bar is a control link that keeps the front axle centered side to side under the body. Worn bushings let the axle wander, which can cause the vehicle to steer loosely or push the tires off-center. Bushings that are firm and grease free rely on their liner rather than regular greasing, so inspect for cracking and play instead.
After any track bar change, alignment is needed to set the wheel position correctly. Check the bar’s ends and mounting bolts once the vehicle has settled, and recheck tightness after the first few drives. A track bar set too long or short can pull the axle to one side, so measure before finalizing.
- Inspect bushings for splits and play
- Recheck mounting bolts after first drives
- Align the front end after any change
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS62109 |
| UPC | 39703009737 |
| Position | Front |
| Lift compatibility | 2 to 5 in. |
| Bushings | D2 synthetic, high articulation, grease free, PTFE liner |
| Ends | Forged |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ) in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, and the 1997–2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
The XJ and TJ trims above are the vehicles this bar covers, so confirm fit for any other year, model or trim before ordering.
Installation notes
A track bar sets the front axle’s side-to-side position, so an alignment is generally needed after the bar is changed. Check the package contents against your installation before starting, including hardware and tools.












