Overview
The RS62105 is an adjustable rear track bar for 2007–2018 Jeep Wrangler JK models with a 2 to 6-inch lift. It centers the rear axle in position after the lift, and it fits both 2-door and 4-door JKs.
The bar is made from .281 DOM wall tubing with forged ends and a 1.25-inch outside diameter. The D2 bushings are grease free, with a built-in liner for quiet, low-maintenance operation. It installs bolt-on and has a black powder coat finish.
Key features
- Adjustable rear track bar
- Designed for lifts of 2 to 6 inches
- Heavy-duty DOM wall tubing with forged ends
- 1.25-inch outside diameter bar
- D2 bushings, grease free
- Black powder coat finish, bolt-on installation
Rear axle control on JK
On a Wrangler JK, the rear track bar keeps the axle from shifting side to side under load and when the suspension articulates. A lift changes that geometry, so an adjustable bar is useful for setting the axle back in position. Heavy-duty tubing and forged ends help the bar hold its shape under repeated loading on rough trails.
Maintenance is light. Inspect the bushings for wear, check that the bar pivots freely through its range, and look for loose frame or axle brackets after a few trips. Because the bushings are grease free, the main job is watching for play and cracks rather than lubrication.
- Check the bar for bends after hard trail use
- Look for play at the frame and axle ends
- Confirm the axle is centered after the lift
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS62105 |
| Position | Rear |
| Lift height range | 2 to 6 inches |
| Tubing | .281 DOM wall |
| Bar diameter | 1.25 inches OD |
| Finish | Black powder coat |
| Installation | Bolt-on |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler JK, including 2-door and Unlimited 4-door models in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
Wrangler TJ, LJ and JL models are not on this list. Confirm your vehicle’s year, model and trim before ordering.







