Select your vehicle

Rancho Control Arm Geometry Correction Brackets – RS62118B

Rancho

$186.78In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 9:00 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front geometry correction brackets for 2018–2026 Jeep Wrangler JL and 2020 Gladiator
  • Keep control arms at factory angles on lifts of 2 to 4.5 inches
  • One-piece welded design, bolts to factory locations
  • Part number RANRS62118B

Description

Overview

The Rancho RS62118B is a set of front geometry correction brackets for the 2018–2026 Jeep Wrangler JL and the 2020 Jeep Gladiator. They keep the control arms at factory angles once an aftermarket lift of 2 to 4.5 inches is installed. Correct angles help reduce road harshness and brake dive, and allow proper caster after the lift.

The bracket uses a three-hole upper control arm locator and is a one-piece welded design. It bolts directly to the factory locations.

Key features

  • One-piece welded geometry correction bracket
  • Three-hole upper control arm locator
  • Keeps control arms at factory angles on lifts of 2 to 4.5 inches
  • Bolts directly to the factory locations
  • Front position

Alignment after a lift

A lift changes the angles of the control arms, and that shift affects caster, ride quality and how the brakes feel under hard stops. Correction brackets hold the arms closer to their factory geometry, so the suspension behaves more like it did before the lift. They suit trucks that already run a lift within the rated range and need predictable steering and braking.

Even with correction brackets, a new alignment is part of the job. Have the caster and toe checked after installation and watch for uneven tire wear in the first few weeks of driving. Inspect the control arm bushings and ball joints during the install, since a lift often exposes parts that were worn but not noticed before.

  • Confirm caster and toe after the install
  • Look for uneven tire wear
  • Inspect bushings and ball joints during the install

Specifications

Brand Rancho
Part number RANRS62118B
Position Front
Lift height range 2 to 4.5 inches
Construction One-piece welded
Fitment type Direct fit

Vehicle fitment

Rancho lists these brackets for the 2018–2026 Jeep Wrangler (JL), in Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims, and for the 2020 Jeep Gladiator in Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.

The JK and LJ Wrangler, and Jeep models before the 2018 JL, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

It fits the 2018–2026 Jeep Wrangler JL in Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims, and the 2020 Jeep Gladiator in Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.

Fitment

VehicleYearsTrims
Jeep Gladiator2020Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S
Jeep Wrangler (JL)2018–2026Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the RS62118B fit a 2020 Jeep Gladiator?

Yes. It fits the 2020 Jeep Gladiator in Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims. Confirm your trim before ordering, since the Wrangler JL is also covered.

What lift height does the RS62118B work with?

It is designed for lifts of 2 to 4.5 inches. Within that range it keeps the control arms at factory angles.

Does the RS62118B need drilling?

It bolts directly to the factory locations. Confirm fit for your vehicle's year, model and trim before starting the install.

Do correction brackets work with other lift parts?

They are designed for a lift in the rated range with factory-style control arm mounting. Check that other front components, such as the track bar and sway bar links, suit the same lift before installing, and set alignment once everything is in place.

How do I know if the control arm bushings need replacing?

Look for cracked, split or compressed rubber, and listen for clunks over bumps or a loose feel at the steering wheel. Worn bushings change the angle of the arm, so check them whenever the brackets are installed or the front end is serviced.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon